Home Network Community >
DSL Modem Routers >
TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-04
2014-04-04 12:07:59
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-04
TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
2014-04-04 12:07:59
Tags:
Region : Mexico
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : TD-W8961ND_V3_140305
ISP : Telmex Infinitum
I did a firmware update, as procedure on tp-link.com says. After a básic configuration (DSL to navigate Internet) it works ok. But, after configure LAN, WIFFI, TIME ZONE, and another configurations, the admins page http://192.168.1.1, no loads any more. Time out with any browser. ping to 192.168.1.1 works ok, browsing Internet OK, but no administration.
I did a second hard reset, a second flash firmware update, soft reset and the issue continues. Please help me to solve this situation ASAP.
Previus firmware: TD-W8961ND_V3_120524
New Firmware: TD-W8961ND_V3_140305 . http://www.tp-link.com/en/support/download/?model=TD-W8961ND&version=V3
(Your web page says: "As we have updated the security mechanism on this version of firmware, once you have upgraded to this firmware, you will not be able to downgrade to the old one")
Via wire cable update.
Saludos desde México.
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : TD-W8961ND_V3_140305
ISP : Telmex Infinitum
I did a firmware update, as procedure on tp-link.com says. After a básic configuration (DSL to navigate Internet) it works ok. But, after configure LAN, WIFFI, TIME ZONE, and another configurations, the admins page http://192.168.1.1, no loads any more. Time out with any browser. ping to 192.168.1.1 works ok, browsing Internet OK, but no administration.
I did a second hard reset, a second flash firmware update, soft reset and the issue continues. Please help me to solve this situation ASAP.
Previus firmware: TD-W8961ND_V3_120524
New Firmware: TD-W8961ND_V3_140305 . http://www.tp-link.com/en/support/download/?model=TD-W8961ND&version=V3
(Your web page says: "As we have updated the security mechanism on this version of firmware, once you have upgraded to this firmware, you will not be able to downgrade to the old one")
Via wire cable update.
Saludos desde México.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
6 Reply
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-10
Re:TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
2014-04-12 03:02:43
I think the same thing I'm faced after upgrading the firmware !!
http://forum.tp-link.com/showthread.php?75833-Problems-after-upgrading-to-v3-Build-140305-%28®ion=china
we need the help !
http://forum.tp-link.com/showthread.php?75833-Problems-after-upgrading-to-v3-Build-140305-%28®ion=china
engnajjar wrote
Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : v3 Build 140305
ISP :
hello everybody
my router was working well before upgrading without any error !!
I've entered TP-Link website and found a newer version
note : I've bought the router comes with this version v3 build 120524.
then I've upgraded it to the latest version v3 build 140305 and Committed all steps .
but after that the wireless network disconnects many times and becomes limited access for some minutes
then back to work or I'm forced to turn it off then on to work again !!
I know the even there is no internet connection , I could access the router panel though the wireless but I can't when "limited access network" , but though the cable I can !
here is the System log :
[HTML]
4/8/2014 22:5:19> netMakeChannDial: err=-3000 rn_p=804cfe38
4/8/2014 22:5:20> Last errorlog repeat 2 Times
4/8/2014 22:5:37> netMakeChannDial: err=-3000 rn_p=804cfe38
4/8/2014 22:5:41> Last errorlog repeat 2 Times
4/8/2014 22:6:48> netMakeChannDial: err=-3000 rn_p=804cfe38
4/8/2014 22:6:57> Last errorlog repeat 2 Times
4/8/2014 22:7:14> netMakeChannDial: err=-3000 rn_p=804cfe38
4/8/2014 22:7:18> Last errorlog repeat 2 Times
4/8/2014 22:10:21> netMakeChannDial: err=-3000 rn_p=804cfe38
4/8/2014 22:13:20> Last errorlog repeat 41 Times
4/8/2014 22:13:21> netMakeChannDial: err=-3000 rn_p=804cfe38
4/8/2014 22:23:34> Last errorlog repeat 375 Times
4/8/2014 22:23:43> netMakeChannDial: err=-3000 rn_p=804cfe38
4/10/2014 15:10:46> netMakeChannDial: err=-3000 rn_p=804cfe38
4/10/2014 15:10:55> Last errorlog repeat 5 Times
4/10/2014 15:11:27> netMakeChannDial: err=-3000 rn_p=804cfe38
4/10/2014 15:19:44> Last errorlog repeat 180 Times
4/10/2014 15:21:47> netMakeChannDial: err=-3000 rn_p=804cfe38
4/10/2014 15:21:48> netMakeChannDial: err=-3000 rn_p=804cfe38
4/10/2014 15:21:58> Last errorlog repeat 3 Times
4/10/2014 15:22:10> netMakeChannDial: err=-3000 rn_p=804cfe38
4/10/2014 15:39:39> Last errorlog repeat 134 Times
4/10/2014 15:40:21> netMakeChannDial: err=-3000 rn_p=804cfe38
[/HTML]
please help me :(
we need the help !
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2171
Helpful: 88
Solutions: 0
Stories: 0
Registered: 2013-01-12
Re:TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
2014-04-13 02:42:12
Do you have 192.168.1.1 router IP address?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-10
Re:TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
2014-04-13 19:42:37
jimasek wrote
Do you have 192.168.1.1 router IP address?
yes , but not during the time when the router fails so I have to turn it off then turn on to work again !!
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-05-17
Problem wifi always disconnect and signal very week...
2014-05-17 20:48:06
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : TD-W8961ND_V3_140305
ISP : TM Streamyx
I did a firmware update, as procedure on tp-link.com says. After a básic configuration (DSL to navigate Internet) it works ok. But, after configure LAN, WIFFI, TIME ZONE, and another configurations, the admins page http://192.168.1.1, no loads any more. Time out with any browser. ping to 192.168.1.1 works ok, browsing Internet OK, but no administration.
I did a second hard reset, a second flash firmware update, soft reset and the issue continues. Please help me to solve this situation ASAP.
Previus firmware: TD-W8961ND_V3_120524
New Firmware: TD-W8961ND_V3_140305 . http://www.tp-link.com/en/support/download/?model=TD-W8961ND&version=V3
(Your web page says: "As we have updated the security mechanism on this version of firmware, once you have upgraded to this firmware, you will not be able to downgrade to the old one")
Via wire cable RJ 45 update.
Hardware Version : Not Clear
Firmware Version : TD-W8961ND_V3_140305
ISP : TM Streamyx
I did a firmware update, as procedure on tp-link.com says. After a básic configuration (DSL to navigate Internet) it works ok. But, after configure LAN, WIFFI, TIME ZONE, and another configurations, the admins page http://192.168.1.1, no loads any more. Time out with any browser. ping to 192.168.1.1 works ok, browsing Internet OK, but no administration.
I did a second hard reset, a second flash firmware update, soft reset and the issue continues. Please help me to solve this situation ASAP.
Previus firmware: TD-W8961ND_V3_120524
New Firmware: TD-W8961ND_V3_140305 . http://www.tp-link.com/en/support/download/?model=TD-W8961ND&version=V3
(Your web page says: "As we have updated the security mechanism on this version of firmware, once you have upgraded to this firmware, you will not be able to downgrade to the old one")
Via wire cable RJ 45 update.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-11-06
Webinterface stops working
2014-11-06 06:44:47
I have the same problem with my device, it works for some hours without any problem, but then the webinterface is more accessible.
The same for the telnet interface... but ping and network is still working.
Model No: TD-W8961ND
Hardware Version: V2
Firmware Version: 2.0.0 Build 120427 Rel.09135
Features working / no more working:
DynDNS --> No
LAN --> Yes
Virtual Server (Port forwarding) --> No
ADSL --> Yes
Telnet --> No
Webinterface --> No
DHCP --> Yes
UPNP --> Yes
I have already tried to contact the support but they recommend me to go to the seller.
What i have tried to fix this:
- Softreset
- Hardreset
- Reflash firmware
- Setting up all manually (without using old config)
All with no luck...
Has anybody a solution?
The same for the telnet interface... but ping and network is still working.
Model No: TD-W8961ND
Hardware Version: V2
Firmware Version: 2.0.0 Build 120427 Rel.09135
Features working / no more working:
DynDNS --> No
LAN --> Yes
Virtual Server (Port forwarding) --> No
ADSL --> Yes
Telnet --> No
Webinterface --> No
DHCP --> Yes
UPNP --> Yes
I have already tried to contact the support but they recommend me to go to the seller.
What i have tried to fix this:
- Softreset
- Hardreset
- Reflash firmware
- Setting up all manually (without using old config)
All with no luck...
Has anybody a solution?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 926
Helpful: 19
Solutions: 1
Stories: 0
Registered: 2012-10-29
Re:TD-W8961ND V3 - Lost admin http://192.168.1.1 after last firmware update
2014-11-06 10:55:06
Is it the same problem here?
http://forum.tp-link.com/showthread.php?3790-TD-W8961ND-cant-access-router-login-page®ion=china
After restart, can you access the web page?
On its web interface, go to Access Management---UPnP, choose Deactivated and Save.
Now test if it still happens.
After restart, can you access the web page?
On its web interface, go to Access Management---UPnP, choose Deactivated and Save.
Now test if it still happens.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-04
2014-04-04 12:07:59
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-04
Information
Helpful: 0
Views: 1637
Replies: 6
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message