It shows limited access.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

It shows limited access.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
It shows limited access.
It shows limited access.
2014-02-26 16:11:21
Region : Argentina

Model : TL-WA901ND

Hardware Version : V3

Firmware Version :

ISP :


Hello, I have 3 WA5210G and all the 3 are connected to a switch. I have 2 NIC's on my server one is connected to the internet and is shared with ICS, and the switch is connected to the other NIC.Am using a 3G modem as a source of my internet. Below are the details of the connections

NIC-1
IP: 192.168.1.2
Subnet: 255.255.255.0
Default Gateway: 192.168.1.1 (the ip of my wireless 3g router TL-MR3420)

NIC-2
IP: 192.168.0.1
Subnet: 255.255.255.0
Default Gateway:

below are the configuration for my WA5210G access points

AP-1
IP: 192.168.0.10
Subnet: 255.255.255.0
Default Gateway: 192.168.0.1(the ip of NIC-2) since the switch is connected to that port)

AP-2
IP: 192.168.0.11
Subnet: 255.255.255.0
Default Gateway: 192.168.0.1(the ip of NIC-2) since the switch is connected to that port)

AP-3
IP: 192.168.0.12
Subnet: 255.255.255.0
Default Gateway: 192.168.0.1(the ip of NIC-2) since the switch is connected to that port)

If I connects, I gets limited connection and no internet access. Please help me on how to make this run smoothly. Thank you so much.
  0      
  0      
#1
Options
3 Reply
Re:It shows limited access.
2014-03-07 14:59:47
If you connect a PC directly to the switch, can it get internet access?

What mode is the 3 TL-WA5210G working in? For Access Point mode, don't use Quick setup to configure!!! Reset the 3 AP and use wireless menu to re-configure them step by step.
  0  
  0  
#2
Options
Re:It shows limited access.
2014-03-07 17:32:37
[QUOTE=Tobacco;142891]If you connect a PC directly to the switch, can it get internet access?

What mode is the 3 TL-WA5210G working in? For Access Point mode, don't use Quick setup to configure!!! Reset the 3 AP and use wireless menu to re-configure them step by step.[/QUOT

No, if I connect a pc directly to the switch it can get internet access and all the 3 are working in AP mode. Thanks
  0  
  0  
#3
Options
Re:It shows limited access.
2014-03-13 13:32:59
The Quick setup of 5210 has some problem. So Don't use Quick setup to configure!!! Reset the 3 AP and use wireless menu to re-configure them step by step. Have you try that?
  0  
  0  
#4
Options