Vx1800v and EasyMesh
When configuring Vx1800v with re700x extender
One band appears 2.4GHz or 5Ghz
Every reboot shows a band???
The problem is that I have some devices in the house that do not support the 5Ghz band
Is there a solution?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I disabled Smart Connect
But it didn't work
It seems there is a manufacturing problem
As I understood here: https://community.tp-link.com/en/business/forum/topic/673456?replyId=1379128
- Copy Link
- Report Inappropriate Content
According to the thread there's a limitation in Easymesh implementation for VX1800v.
You can try to connect the re700x as a regular RE (i.e. not in Easymesh) to utilize both wireless bands.
- Copy Link
- Report Inappropriate Content
Today I tried the old wifi extender re650..(AC)
and the 5 and 2.4 bulbs lit up normally
in Easymesh mode
as for the extenders re700x and re505x..(AX)
only one band
- Copy Link
- Report Inappropriate Content
Hi, I don't think RE650 supports EasyMesh. So I think when it connects to Archer VX1800v, it can only work as a standard non-mesh extender.
Did you see somewhere on the web UI of RE650 or VX1800V said RE650 is connected via EasyMesh?
azzoug wrote
Today I tried the old wifi extender re650..(AC)
and the 5 and 2.4 bulbs lit up normally
in Easymesh mode
as for the extenders re700x and re505x..(AX)
only one band
By the way, even though there is one band/LED displayed on the RE700x/505x, the extenders should still broadcast both 2.4+5 GHz networks.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 74
Replies: 5
Voters 1
