Use printserver with Canon LBP-2900
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Use printserver with Canon LBP-2900
Region : Argentina
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130909
ISP :
Hi,
I am owner of a TL- WDR3600. According to compatibility list, the print server should be compatible with my printer Canon LBP-2900 .
The printer is installed by default with USB cable on my Win7 32bit machine and it works well.
After installing "USB Printer Controller " the printer is detected by the software , and can be connected .
After starting a print job the printer starts printing but the printer monitor show a "communication error".
If a new print job is sent to the printer the first print job is printed again and then the second one. It comes again to the error message described above.
If a third print job is sent, the first , then the second and then the third is printed again.
To me it looks like the printer could not report windows that the everything was printed fine and so the print job remains in the printer spooler and will be printed over and over again .
If I manually reboot the print spooler only one job is first printed again , then two, then three .
I've already tried the following solutions :
All firewalls and antivirus disabled -> same result as described above
disable "bi-directional printing" in LBP -2900 properties -> printer do nothing
try to use option "send directly to printer" -> same result as described above
tested the different printer driver -> same result as described above.
try windows xp 32bit -> same result as described above.
Has anybody an idee how i can solve this problem?
Please excuse my bad english ;-)
Thank you for your help!
Sincerely yours
Christian Hiesberger
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_130909
ISP :
Hi,
I am owner of a TL- WDR3600. According to compatibility list, the print server should be compatible with my printer Canon LBP-2900 .
The printer is installed by default with USB cable on my Win7 32bit machine and it works well.
After installing "USB Printer Controller " the printer is detected by the software , and can be connected .
After starting a print job the printer starts printing but the printer monitor show a "communication error".
If a new print job is sent to the printer the first print job is printed again and then the second one. It comes again to the error message described above.
If a third print job is sent, the first , then the second and then the third is printed again.
To me it looks like the printer could not report windows that the everything was printed fine and so the print job remains in the printer spooler and will be printed over and over again .
If I manually reboot the print spooler only one job is first printed again , then two, then three .
I've already tried the following solutions :
All firewalls and antivirus disabled -> same result as described above
disable "bi-directional printing" in LBP -2900 properties -> printer do nothing
try to use option "send directly to printer" -> same result as described above
tested the different printer driver -> same result as described above.
try windows xp 32bit -> same result as described above.
Has anybody an idee how i can solve this problem?
Please excuse my bad english ;-)
Thank you for your help!
Sincerely yours
Christian Hiesberger