Poor signal

Poor signal

Poor signal
Poor signal
Saturday
Model: Deco X10  
Hardware Version: V1
Firmware Version: 1.1.7

I have one main and 2 nodes. My summerhouse is approximately 20 ft from my house with 1 cavity wall a wooden fence and the summerhouse timber wall between the nearest node to the node in the summer house. I can't get the summerhouse node to get anything  more than poor signal (1bar). What can I do to increase this signal.

The second node has a high signal from the main deco. I csnt backhand any nodes. Could I use a powerline adapter from the modem/router plugged into the SH node?

  0      
  0      
#1
Options
1 Reply
Re:Poor signal
Sunday

  @Sjones369 

 

You can use powerline adapter, but one that is in the house must be plugged to Main Deco (or to Satellite Deco), not to modem/router.

 

I suggest getting TP-Link brand of powerline adapters, to ensure it is compatible with Deco Ethernet backhaul. I recommend one of these two sets: TL-PA7017 KIT or TL-PA7017P KIT. The second is with pass-through power socket, otherwise they should be identical.

  1  
  1  
#2
Options