Deco X50 ethernet backhaul doesn't work.
Hello
I have a Deco BE85 and a Deco X50 Outdoor.
System:
Deco BE85 ----> TL-SG3428X switch ---> TL-SG108PE ---> Deco X50
However, the Ethernet backhaul does not work. There is only wifi connection between de deco BE85 and the Deco 50.
The deco X50 is powered by the TL-SG108PE (PoE).
All my network users have ip adress starting with 192.168.68. xxx
The X50 ---> 192.168.71.250
Is ther a solution to connect the Deco BE85 and Deco X50 with Ethernet backhaul?
Thanks,
renaatdb
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Try this: bring that X50 Outdoor to where Deco BE85, connect them with short Ethernet cable and use X50 Outdoor power supply to power it on.
This is what you will have:
Deco BE85 ---> Deco X50
If Ethernet backhaul works in this configuration, and X50 gets IP address from 192.168.68.* IP range, next step would be to test first switch, still using X50 Outdoor power supply:
Deco BE85 ----> TL-SG3428X switch ---> Deco X50
If Ethernet backhaul is still working and X50 Outdoor IP address still correct, now with short Ethernet cable and still using X50 Outdoor power supply connect it to one of non-POE ports of TL-SG108PE (ports 5 to 8), and see if Ethernet backhaul still works:
Deco BE85 ----> TL-SG3428X switch ---> TL-SG108PE ---> Deco X50
- Copy Link
- Report Inappropriate Content
Try this: bring that X50 Outdoor to where Deco BE85, connect them with short Ethernet cable and use X50 Outdoor power supply to power it on.
This is what you will have:
Deco BE85 ---> Deco X50
If Ethernet backhaul works in this configuration, and X50 gets IP address from 192.168.68.* IP range, next step would be to test first switch, still using X50 Outdoor power supply:
Deco BE85 ----> TL-SG3428X switch ---> Deco X50
If Ethernet backhaul is still working and X50 Outdoor IP address still correct, now with short Ethernet cable and still using X50 Outdoor power supply connect it to one of non-POE ports of TL-SG108PE (ports 5 to 8), and see if Ethernet backhaul still works:
Deco BE85 ----> TL-SG3428X switch ---> TL-SG108PE ---> Deco X50
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I realy don't no.
I started the installation process again. Took your tips into account. Now it works. I havent't changed anything about the switch settings.
Thanks .
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 107
Replies: 4
Voters 0
No one has voted for it yet.