Deco BE65Pro(1.0) stuck in solid yellow
Hi,
One of my three Deco BE65Pro(1.0) is stuck with the yellow led, always on.
I tried resetting from fabric but it doesn't work.
I also tried recovering the firmware and when I do it with HTTP Uboot method, it says the upgrade failed and that I chose the wrong file.
The problem is that I'm confused with the hardware version my deco has, because the base says S/N: Y2410???????? US/1.6, which would be version 1.6, but when I enter the management interface of the device and see the info of the other two decos, the model is Deco BE65Pro(1.0) which would be version 1.0.
Also, the problem is that the latest version that the 3 decos where updated to (even the one that is stuck with the yellow led) was firmware version "1.1.0 Build 20241110 Rel. 19378" that is only available for hardware version 1.6.
I hope you can help me,
Thanks,
@David-TP I have the exact same issue .. I've been troubleshooting for the past week attempting every single possible solution... nothing works.. at one point it randomly turned back blue, I got it to work for like an hour, and then I attempted to unplug and move into the bedroom, and now it's stuck yellow again ... doesn't make any sense unless firmware was poorly developed ...
my circumstances are exactly the same... I purchased a 3 pack of deco be65 during Black Friday November 2024, and I've already ran into this problem multiple times.... I'm on the same firmware and hardware version as the guy above.
Caption
