Home Network Community > Powerline Adapters > EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa
< Powerline Adapters

EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa

EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa

EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa
EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa
2025-02-08 07:13:21 - last edited 2025-02-11 06:08:53
Tags: #OneMesh #EasyMesh
Model: TL-WPA7519 KIT  
Hardware Version: V4
Firmware Version: 220701

I have connected a WPA7519 and a WPA7619 to a Archer MR505 via Ethernet cable and powerline.

It was not possible to set up a Mesh. The router does not find either WPA. The two WPAs "see" each other and communicate via OneMesh, but not with the router.

 

I have tried everything, FW update, factory reset, WPS setup, but no success.

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa-Solution
2025-02-11 06:08:48 - last edited 2025-02-11 06:10:59

Hi@WernerV,

The MR505 is not an onemesh compatible router. You can click on the compatible list to see more models.

If you want to use the same SSID as the router, you can try WiFi clone.

Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE550 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, ECO Mode, and More Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa-Solution
2025-02-11 06:08:48 - last edited 2025-02-11 06:10:59

Hi@WernerV,

The MR505 is not an onemesh compatible router. You can click on the compatible list to see more models.

If you want to use the same SSID as the router, you can try WiFi clone.

Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE550 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, ECO Mode, and More Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul
Recommended Solution
  0  
  0  
#2
Options
Re:EasyMesh router MR505 does not "see" OneMesh devices WPA7519 and WPA7619 and viceversa
2025-02-11 07:24:14

  Hi@Joseph-TP 

 

1) EasyMesh is supposed to be backward compatible to OneMeeh, I have read this in several places.

2) WPA7517/7617 are labeled "planned" for EasyMesh since I bought them some time ago, yet nothing happens, no FW update for either. Since the -19 versions are "localized" versions of the -17 devices, I suppose if one day an EasyMesh FW will be released, it will be for both.

3) The TPLink app shows "EasyMesh" for the 7519 and 7619 instead of OneMesh.

 

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 114

Replies: 2

Tags

OneMesh EasyMesh
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.