Archer VX1800v with re505x
Archer VX1800v with re505x
Hi
Excuse me my English is weak
I have a vx1800v router And a re505x range extender
My internet speed is 100 megabytes per second
The router gives me a speed of 98
The extender does not exceed 65
Even if I put the extender next to the router
But with my old router vr400 it gives me full speed
What do you think is the problem
thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
When using a range extender the speed halves with every wireless hop.
That's because the wirless connection is half-duplex in nature.
If your main router gives 1000 mbps (on wireless), a range extender (connected wirelessly) would give you around half of that.
If you conect the re505x in AP mode (wire connected) then you'll get the full speed from your modem.
- Copy Link
- Report Inappropriate Content
Thanks for the reply
But as I told you
When I return the old vr400 modem I get full speed
With the same extender
Are there any special settings for the vx1800v?
- Copy Link
- Report Inappropriate Content
In your case, even that the connection between the VX1800v and RE505x is half-duplex, you should get a speed of around 100 mbps.
Look for a certain settings in VX1800v like disable QoS, change wireless settings (wireless channel and width) to pinpoint the sweet-spot where you'd get best bandwidth.
For example change the channel width for the wireless band you're using for connecting the RE:
- Copy Link
- Report Inappropriate Content
What is half-duplex?
Is it an option that can be disabled?
Excuse me, I am new to this field
- Copy Link
- Report Inappropriate Content
No, that's a standard in telecommunications and you can switch that only for a wired (cable) connection.
But as I already meantioned, that's not an issue in your case, since RE505X has 300 Mbps at 2.4GHz, 1200 Mbps at 5GHz.
Even halved because of the wireless connection limitation, you should get your ISP's 100 mbps bandwidth on both bands.
So, better look at the VX1800v settings pointed in my previous post.
- Copy Link
- Report Inappropriate Content
I did as you told me.
I put the extender next to the router, almost at zero distance. The percentage still does not exceed 70 percent.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
None that I can think of. I believe that you should experiment with different wireless channels and channel width.on VX1800v to get the best connection bandwidth.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 410
Replies: 11
Voters 0
No one has voted for it yet.