@f11942 

 

Hi,

 

While the TL-WR902AC is in router mode (mode switch set to "Share ETH") log into the admin webGUI, go to the "Operation Mode" menu and switch it from "Wireless Router" to "3G/4G Router".
 

  @woozle 

Thank you for quick respons :O)

Should I put it back to "share hotspot" ?

I only ned to get access to internet from the Ethernet port, not the Wifi 

  @f11942 

 

You could try and see what happens, but I think switching the TL-WR902AC to Hotspot mode will probably deactivate the 3G/4G USB dongle.

 

If you don't need the Wi-Fi, then you can disable wireless via the "Wireless x GHz" menus.

 

  @woozle 

I really should not have tried switching back :O(. Now again I can't get it to work on the internet with 3G/4G. Tried changing the mode as you suggested, it then reboots and then my PC gets no IP address more. If I put Mode-Switch back on Hotspot, my PC gets an IP again, but then 3G/4G is not an option again :O(

Tried the guidance, but it doesn't match what I see in the web-gui. and i can't get it to work :O(