Early Access Deco BE85_1.1.3 New firmware with Optimized System Stability and Network Performance
This Article Applied to
Deco BE85_V1/V2
Modifications and Bug Fixes
- Added the HomeShield APP block features.
- Added more supported Kasa/Tapo smart devices under Smart Home.
- Improved stability and security of the system.
- Improved the QoS features.
- Fixed the issue that the NordVPN client doesn't work in some cases.
- Fixed the issue that the 240MHz channel width option disappears in some cases.
- Fixed the issue that the IPTV client connected to the satellite Deco couldn't play multicast streams in some cases.
- Fixed the issue that the wireless channel or channel width couldn't be modified in some cases.
- Fixed the issue that the main Deco incorrectly identified the Internet port in some cases.
Download Link:
| Deco BE85_V1/V2 | 1.1.3_build_20250328_Pre Release 3.31 updated |
Update Advice:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The 1.1.3 version could revert to the official 1.1.1 directly via web UI.
Related Articles
Deco BE65_V1_1.1.0 Supported WireGuard VPN, Channel Selection and Matter
Deco BE65_V2_1.1.4 Further Optimized Client Connection Status and Network Stability
Deco BE85_1.1.2 New firmware with Optimized System Stability and Network Performance
Deco BE95_1.1.0 Added WireGuard VPN, Channel Selection And Matter
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The router doesn't have wifi. Please remember that Deco shows 930/930 when it's connected to the router and in AP mode. That eliminates the cable too. (but I tried a couple different cables and BE95 ports).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the details.
Can I have the model number of the Verizon main DHCP router without WiFi?
For now, I didn't have any other suggestions either. It is suggested to send an email to support.forum@tp-link.com with some screenshots of the speedtest results on the Samsung mobile phones, then I can escalate your case to the senior engineer for further assistance.
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
The issue has resolved itself.
I still don’t fully understand what was causing the problem, but as of now, the BE85 is working as expected.
Most likely, the culprit was the UCG Ultra.
I switched to the UCG Fiber and connected a CAT5 cable from the ONT to the “Fiber” WAN port using a 10G SFP+ RJ45 module.
Somehow, this resolved all of the issues.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP 5 of my 7 Sony TV's have stopped connecting after installing this update, they simply will no longer connect to the main network. They do continue to be able to connect to the IoT SSID though.
- Copy Link
- Report Inappropriate Content
Hi, it still needs a while for the release of Deco BE85_1.1.3. You can subscribe to or bookmark this post, and if there is any further news, I will keep this post updated.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, does your Sony TVs support 5 GHz? Would there be any error message when they can't connect to the main Network?
Compared with the main WiFi network, I wonder if the smart TVs might prefer the 2.4GHz-only IoT network.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 9581
Replies: 90
Voters 1
