Early Access Deco BE85_1.1.3 New firmware with Optimized System Stability and Network Performance
This Article Applied to
Deco BE85_V1/V2
Modifications and Bug Fixes
- Added the HomeShield APP block features.
- Added more supported Kasa/Tapo smart devices under Smart Home.
- Improved stability and security of the system.
- Improved the QoS features.
- Fixed the issue that the NordVPN client doesn't work in some cases.
- Fixed the issue that the 240MHz channel width option disappears in some cases.
- Fixed the issue that the IPTV client connected to the satellite Deco couldn't play multicast streams in some cases.
- Fixed the issue that the wireless channel or channel width couldn't be modified in some cases.
- Fixed the issue that the main Deco incorrectly identified the Internet port in some cases.
Download Link:
| Deco BE85_V1/V2 | 1.1.3_build_20250328_Pre Release 3.31 updated |
Update Advice:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The 1.1.3 version could revert to the official 1.1.1 directly via web UI.
Related Articles
Deco BE65_V1_1.1.0 Supported WireGuard VPN, Channel Selection and Matter
Deco BE65_V2_1.1.4 Further Optimized Client Connection Status and Network Stability
Deco BE85_1.1.2 New firmware with Optimized System Stability and Network Performance
Deco BE95_1.1.0 Added WireGuard VPN, Channel Selection And Matter
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I've encountered a strange problem.
When it's in AP mode, the upload speed is bad (156Mb) for all wifi connected devices.
The wired upload is good (930Mb)
When it's in router mode, both upload and download are greate.
It looks like BE85 is throttling upload when in AP mode.
Is there anything I can do to fix this?
- Copy Link
- Report Inappropriate Content
i have my BE85 in AP mode and have no issues with upload and download speeds, can I ask how you are measuring this?
My network comprises
UniFi Dream router 7 with 900Mbps (D) and 110 (U)
the UDR7 connects via SFP+ 10Gbe port to main Deco on top floor this connects to second Deco on middle floor via car 6 cable (10Gbe) this then spurs to a 10Gbe switch
I host open Speedtest on my Qnap Ts474 (10Gbe port on a PCIe card) and this shows consistent 1.1-1.2 Gbps when tested on both a iPhone 16Pro Max and Samsung S25ultra (connected via WiFi to the MLO wlan created by Deco (UniFi is using a separate SSID).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Mishastr
1. What device are you using to run the test? are you using MLO and Wifi 7?
2. What happens if you connect to the 6GHz only network in terms of speed? (Just in case your device is only using 2.4Ghz)
3. How afar away from the Deco are situated when testing? (In terms of range and any obstacles likely to affect the signal)
4. If you test, then selectet airpolane mode for 15 seconds and go back to normal and test again, does the speed increase? (Just to ensure you are connected to the nearest Deco, as soome devices, (especially Apple, can "stick" to an AP they first connected to, rather than roaming to the next one with a stronger signal).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 9663
Replies: 90
Voters 1
