Early Access Deco BE85_1.1.3 New firmware with Optimized System Stability and Network Performance
This Article Applied to
Deco BE85_V1/V2
Modifications and Bug Fixes
- Added the HomeShield APP block features.
- Added more supported Kasa/Tapo smart devices under Smart Home.
- Improved stability and security of the system.
- Improved the QoS features.
- Fixed the issue that the NordVPN client doesn't work in some cases.
- Fixed the issue that the 240MHz channel width option disappears in some cases.
- Fixed the issue that the IPTV client connected to the satellite Deco couldn't play multicast streams in some cases.
- Fixed the issue that the wireless channel or channel width couldn't be modified in some cases.
- Fixed the issue that the main Deco incorrectly identified the Internet port in some cases.
Download Link:
| Deco BE85_V1/V2 | 1.1.3_build_20250328_Pre Release 3.31 updated |
Update Advice:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The 1.1.3 version could revert to the official 1.1.1 directly via web UI.
Related Articles
Deco BE65_V1_1.1.0 Supported WireGuard VPN, Channel Selection and Matter
Deco BE65_V2_1.1.4 Further Optimized Client Connection Status and Network Stability
Deco BE85_1.1.2 New firmware with Optimized System Stability and Network Performance
Deco BE95_1.1.0 Added WireGuard VPN, Channel Selection And Matter
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey David
Can you update the Deco app to have a slider button to turn on beta firmware updates
so we can install them from within the phone app - cheers
- Copy Link
- Report Inappropriate Content
Hi, Nice to see you again.
It is supposed to be a good idea. However, the beta firmware was released via cloud OTA and It can't be automatically detected via the Deco APP. Additionally, I think the engineer also wants to control the risks of installing beta firmware.
But it is still suggested to post your feature request here: https://community.tp-link.com/en/home/forum/2252 so that other users can vote to add more support.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for your time and patience.
Deco BE85 will also support Guest captive portals, like Deco BE25/23.
I think there might be certain rhymes of the Deco firmware upgrade, for example, Deco X50_V1 is often the first to add new features; then Deco XE75 is usually the next.
However, it was not always like this. The Channel Selection starts with Deco BE models.
Development resources are limited and a specific model will often be picked out to be the first tested model. Being the first model can enjoy the most updated features but also carries the risk of potential network performance decline.
Thank you very much for your understanding and support.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thank you for the reply, David. I do appreciate that you're able to get back to pretty much every request and do so with haste.
Really looking forward to maximizing these BE85's. Hoping the next firmware release is rock solid.
- Copy Link
- Report Inappropriate Content
@David-TP I see you pushed 1.1 3.
Does this still suffer from the ETH backhaul not being detected as per 1.1.2 reports? You have the updated changeling between 2 and 3?
Thanks!
- Copy Link
- Report Inappropriate Content
Hi, 1.1.3 has fixed the previous WAN connection speed error and improved the overall roaming experience among Decos. I haven't seen it mentioned any bug fix of the Ethernet Backhaul.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I updated to the latet version.
WIFI 6 speed dropped from 120 Mbytes to 30 Mbytes over local network transfer.
- Copy Link
- Report Inappropriate Content
@Ali_BH Oof. :/
Does reverting back immediately increase performance again?
Other than the speed decrease, any other anomalies? Are your decos eth or wireless backhaul?
- Copy Link
- Report Inappropriate Content
@XWEBNetwork hi, i turned on QOS and assigned a device with speed of 20 mbits only. once i checked the speed is 20 Mbits. then i removed assigned device + turning off QOS. eventually everything worked fine and got full speed 160 Mbytes on wifi 6 (5ghz).
btw. QOS wasn't enabled in the beginning. i'm always having such cases because my main router BE85(main) connected to s7 deco models. (i can't see all QOS features due to S7 decos connected).
- Copy Link
- Report Inappropriate Content
Interesting case. I actually stopped mixing decos because of the instabilities and oddities when lacking feature parity. Glad you got it resolved, though!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 8395
Replies: 70
Voters 1
