I need dump file urgently
I need dump file urgently
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2025-01-16
I need dump file urgently
Yesterday
Tags:
Hello Guys,
I accidentally bricked my router while trying to update the firmware, and now it won't boot up or connect to the network.
I tried using the TFTP solution to recover the router, but it didn't work.
The only solution left is to get a dump file to restore the router.
Thanks in advance.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
2 Reply
Posts: 7209
Helpful: 5438
Solutions: 1255
Stories: 7
Registered: 2013-10-12
Re:I need dump file urgently
Yesterday - last edited Yesterday
A quick set of instructions is as follows:
-
Setup your computer to 192.168.0.66 (SubnetMask /24 = 255.255.255.0) and connect it to the router (the port is not relevant).
-
Start TFTP server and provide recovery file with it.
-
To activate TFTP Recovery press and hold Reset Button during powering (8 sec.) on until all LEDs stops to blink and the WPS LED turns on.
Here is alternative stripped TPlink firmware posted here by forum memeber 'pnlshd' for recovering a bricked C50 v4 OpenWrt forum
Specific values needed for tftp on v4
| Bootloader tftp server IPv4 address | 192.168.0.66 (on the PC) |
|---|---|
| Firmware tftp image | tp_recovery.bin (that is the file the client looks for) |
| TFTP transfer window | About 10 seconds after power on, while holding the RESET button |
| TFTP window start | Must power on pressing the RESET button |
| TFTP client required IP address | 192.168.0.x |
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2025-01-16
Re:I need dump file urgently
Yesterday
thanks bro for your help. I already tried flashing the router via TFTP and UART, but neither method worked. Now, the only solution left is to flash the W25Q64 chip using the SPI protocol. That's why I am looking if anyone has the dump file of the router. so appreciate
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2025-01-16
Information
Helpful: 0
Views: 52
Replies: 2
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message