I can’t get the WiFi light to become solid d
Help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Aali222,
If your Range Extender can't be powered on properly, not responding to reset or repeat to reboot itself, please refer to the following suggestions:
1. Please plug the extender into another power socket.
2. Hold the reset pinhole until all the lights turn on for one second, then off.
Note: If the reported models are RE220 V3/RE200 V5/RE190 V5, always repeat to reboot, after trying the above troubleshooting methods, please refer to https://community.tp-link.com/en/home/forum/topic/653040 for further suggestions.
If still same, please contact TP-LINK technical support
- Copy Link
- Report Inappropriate Content
Hi @Aali222,
If your Range Extender can't be powered on properly, not responding to reset or repeat to reboot itself, please refer to the following suggestions:
1. Please plug the extender into another power socket.
2. Hold the reset pinhole until all the lights turn on for one second, then off.
Note: If the reported models are RE220 V3/RE200 V5/RE190 V5, always repeat to reboot, after trying the above troubleshooting methods, please refer to https://community.tp-link.com/en/home/forum/topic/653040 for further suggestions.
If still same, please contact TP-LINK technical support
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 53
Replies: 1
Voters 0
No one has voted for it yet.