Home Network Community > Wi-Fi Routers > New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
< Wi-Fi Routers

New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!

New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!

New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
Yesterday - last edited Yesterday
Model: Archer AX73  
Hardware Version: V2
Firmware Version: 1.1.1 Build 20241031 rel.70279(4555)

Today I updated my Archer AX73 V2 (EU) to the latest firmware 1.1.1 Build 20241031 rel.70279(4555) and I immediately noticed that there was a bug.

 

After updating to the latest version, the Access Control - Whitelist section no longer shows devices and gives the error Operation failed.

 

While I was on the previous firmware (1.1.0 Build 20240323), everything worked normally and devices were displayed and I had about 14 devices registered in the White list.

 

Also, now with the latest firmware, no device can be added or inserted into the White list, and as I said, it constantly throws the error Operation failed!

 

Have your engineers noticed this too, so please check it, attached is a picture...

 

 

TRUST NO ONE, THE TRUTH IS OUT THERE!
  1      
 
  1      
 
#1
Options
5 Reply
Re:New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
Yesterday

Hi  @zexoni70,

 

Thank you for your feedback.

May I know, did you try to reboot the router? Please also try to clear Browser Cache, or log in to the router via different browser.

Also, you can try to factory reset the router. If the issue persists, please collect the system log and send it to email support.forum@tp-link.com, attaching Forum ID 734364 and details, and we will have a dedicated person to assist in analysis and follow-up.

  0  
  0  
#2
Options
Re:New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
Yesterday - last edited Yesterday

Dear @Joseph-TP

 

Yes, I've already reboot the router a few times and the same thing happens.

 

Unfortunately, I'm not able to do a factory default on the device because I have three other Archer C80s connected to it in an EasyMesh network with a lot of clients, so it would be inconvenient to leave all the clients without internet...

 

Wouldn't it be more logical for your engineers to try the same thing and make sure of what I'm saying, because before the update to the latest firmware everything worked perfectly and all clients in the White list were visible.

 

Because immediately after updating to the new firmware, the problem with the White list appeared and as I said, it still exists after several restarts of the AX73 device.

 

Best regards!

 
 
TRUST NO ONE, THE TRUTH IS OUT THERE!
  0  
  0  
#3
Options
Re:New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
Yesterday

  @Joseph-TP 

 

I tried with another browser and clear Browser Cache, but the problem with Operation failed still happens even when Access Control is disabled.

 

So it's definitely a problem in the latest firmware!

 

TRUST NO ONE, THE TRUTH IS OUT THERE!
  0  
  0  
#4
Options
Re:New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
Yesterday

Hi @zexoni70,

 

Thank you for your feedback. For your issue, please help us collect a backup file and send it to email support.forum@tp-link.com, attaching Forum ID 734364 and details, and our senior engineer will assist in analysis and follow-up.

  0  
  0  
#5
Options
Re:New firmware for Archer AX73 V2 1.1.1 Build 20241031 problem with Access Control and White list!
8 hours ago - last edited 8 hours ago

  @Joseph-TP 

same here, i am on
 

Firmware Version: 1.1.1 Build 20241031 rel.70279(5553)

Hardware Version: Archer AX73 v2.0

backup file shared in email

there are the logs,
2025-01-11 15:58:14 access-control[18255]: <6> 239504 Service start
2025-01-11 15:58:14 access-control[18255]: <5> 239606 Flush conntrack table succeeded
2025-01-11 15:58:14 access-control[18255]: <6> 239502 Function enabled
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: 80:A9:97:1F:D8:A7
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: A8:79:8D:FA:BD:FE
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: 38:B1:DB:D8:41:39
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: B4:A8:28:34:1C:AB
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: B8:27:EB:70:32:5C
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: 74:4C:A1:78:33:FD
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: 1C:5F:2B:DF:FB:12
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: 20:34:FB:56:B9:F7
2025-01-11 15:58:13 access-control[18255]: <7> 239012 white list add mac: F8:FC:E1:81:07:AD
2025-01-11 15:58:12 access-control[18255]: <7> 239012 white list add mac: AA:AA:AA:AA:AA:AA
2025-01-11 15:58:12 access-control[18255]: <6> 239505 Service stop

  0  
  0  
#6
Options

Information

Helpful: 1

Views: 126

Replies: 5

Related Articles
AX73 - V2 - New Firmware Archer AX73(EU)_V2_1.1.1 Build 20241031
119 2
New update for Archer AX73 V2 EU
1031 0
Firmware Archer AX73(EU)_V1_1.3.6 Build 20240407
719 2
Unable to update firmware to Archer AX73(EU)_V1_1.2.4 Build 20230317
952 0
Archer AX73 v2 firmware 1.0.12 degraded badwidth
769 0
Archer AX73 V2 EU it has no virtual server ?
544 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.