Thanks for the reply.
Would you be able to advise on a suitable router.

My requirements are: Support UK FTTP upto 1,600 Mbps.
EashMesh with ethernet backhaul.

and if possible:
IPsec and Wireguard VPN client's. Wireguard isn't essential.
The VPN clients are connecting to 3rd party services, so I need to be able to say which devices can access which VPN.

Thanks :)

  @Tom_T_ 

Thanks for the reply.

I've decided to use a 900 Mbps FTTP service, so I'm looking at the router options for that.

I'm struggling to find the AX90 available, but the following are:
AX55 £69.99
AX55 Pro £65.99 <- not sure why the 'Pro' is cheaper.
AX73 £108.99
AXE75 £118.00

From the documents I've found the AX55 Pro, AX73 and the AXE75 all support VPN Client. I've not found a guide for the AX55 to confirm this is supported.

All of these are on the Ethernet backhaul supported list.
Would you say there was any major benefit of one over the others ?

Thanks
 

  @Tom_T_ 

Thanks again.
Looking at the specs I'd probably go with the AX73 @ £108.99

I've been looking at the online emulator and have a query regarding virtual servers and port triggering.
Currenlty I have NAT Port Forwarding rules that route traffic from a specific source address and port, to an internal address and port.
I can't see how this can be done based on the source IP. Is that possible ?

Thanks

 

  @Tom_T_ 

Thanks. I don't this will cause me any real issues.

I can restrict access using IP tablesm on my server.