Home Network Community > Adapters > TL-WN722N can't connect, doesn't blinking
< Adapters

TL-WN722N can't connect, doesn't blinking

TL-WN722N can't connect, doesn't blinking

TL-WN722N can't connect, doesn't blinking
TL-WN722N can't connect, doesn't blinking
a week ago - last edited Sunday
Tags: #Windows 10pro
Model: TL-WN722N  
Hardware Version:
Firmware Version:

Hello, l've bought a computer and a WIN10 licence key. After installation plugged my adapter any USB slot, but nothing happened. Doesn't blinking. It is  in the "device manager - other devices" , USB2.0WLAN. I've 6 USB on the motherboard and tried them all. 

I download the SETUP, it does not find my adapter. 

 

But, this adapter works with an other computer. I The op.sys is WIN10 PRO, too. 

I've 2 adapters and everything is same. They does not blinking in the new pc and blinking and works in the old. 

Could you help me? 

 

Thank you for advance! 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-WN722N can't connect, doesn't blinking-Solution
a week ago - last edited Sunday

  @Okostobi 

 

Ok. That is the first version of the TL-WN722N, which uses an Atheros chip.

 

The driver for it can be found here. https://www.tp-link.com/us/support/download/tl-wn722n/v1/#Driver

 

If it still doesn't install automatically, then try to install the driver manually via the Device Manager and point Windows to the folder "\Driver Files\Windows 8 64bit" of the unzip'd driver package.

Recommended Solution
  1  
  1  
#6
Options
6 Reply
Re:TL-WN722N can't connect, doesn't blinking
a week ago

  @Okostobi 

 

Hi, welcome to our community.

It is suggested to follow this guide to troubleshoot:

Problems you may come across during the driver installation of the TP-Link wireless adapter

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#2
Options
Re:TL-WN722N can't connect, doesn't blinking
a week ago

  @Marvin_S 

Thank you! 

But. The problem is, when I try to install the driver,  it says like this: it is not applicable driver. 

I downloaded the right ZIP, know its place, browse that directory... 

Nothing, just the silent silence... 

  0  
  0  
#3
Options
Re:TL-WN722N can't connect, doesn't blinking
a week ago

  @Okostobi 

 

Hi,

 

Can you please open the Device Manager, right-click on the "USB2.0WLAN" device, select "Properties". In the Window that opens click the "Details" tab and select Hardware Ids from the drop-down. Then send us one of the lines from the "Value" box.

This will help us determine which driver you need.

 

  0  
  0  
#4
Options
Re:TL-WN722N can't connect, doesn't blinking
a week ago

  @woozle 

My system language is HU

This is my adapter:

  0  
  0  
#5
Options
Re:TL-WN722N can't connect, doesn't blinking-Solution
a week ago - last edited Sunday

  @Okostobi 

 

Ok. That is the first version of the TL-WN722N, which uses an Atheros chip.

 

The driver for it can be found here. https://www.tp-link.com/us/support/download/tl-wn722n/v1/#Driver

 

If it still doesn't install automatically, then try to install the driver manually via the Device Manager and point Windows to the folder "\Driver Files\Windows 8 64bit" of the unzip'd driver package.

Recommended Solution
  1  
  1  
#6
Options
Re:TL-WN722N can't connect, doesn't blinking
Sunday

  @woozle 

Thank you! It works!! 

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 108

Replies: 6

Tags

Windows 10pro
Related Articles
 My windows 10 doesn't recognize TL WN722N
6950 0
 Can't find a driver for TL-WN722N v1
2117 0
wn722n
597 0
TL-WN722N extremely unstable operation
3213 1
 TL-WN722N
577 0
 TL-WN722N
1283 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.