TP-LINK RE705X Extender second connection to router

TP-LINK RE705X Extender second connection to router

TP-LINK RE705X Extender second connection to router
TP-LINK RE705X Extender second connection to router
Saturday
Model: RE705X  
Hardware Version: V2
Firmware Version: 63661

Hi Team.

 

I hope you are well.

 

Quick question: Is it normal that the TP-Link RE705X extender sets up an additional connection to my Asus RT-AX86U Pro router? On the router device list, I see the RE705X with a dynamic address over Wi-Fi 5 at 80 Hz with the MAC address found in the TP-Link mobile app. Then I see another Wi-Fi connection at 160 Hz with a static IP address and a MAC address I don't recognize and cannot find in the extender app.

 

I confirmed this is the extender as I disconnected other devices, and the only two entries are from the extender.

 

Does the extender set this up for the 160 Hz band?

 

Thank you.

  0      
  0      
#1
Options
2 Reply
Re:TP-LINK RE705X Extender second connection to router
Yesterday

  @SciGhost

 

You can try the following

 

 

Disable Easymesh feature and check again your connections. If this connection still exists then probably some other device is connected to your Asus router.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:TP-LINK RE705X Extender second connection to router
13 hours ago

  @terziyski 

 

Thank you for your response. I do not have a TP-LINK router; I have an Asus RT-AX86U Pro router and a TP-LINK RE705X extender connected to it in extender mode. I have confirmed that, in this configuration, the extender creates two connections, one of which is a static IP. This is to establish a strong connection to maintain the 160Hz frequency. All is working as intended, and the extender is performing very well.

Thank you. 

 

Kind Regards 

  0  
  0  
#3
Options