Beta Software Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Beta Software Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
This Article Applied to
Deco X50-5G_V1
Optimization and Bug Fixes:
- Fixed the issue of not detecting the IoT Network.
- Optimized the CPU Usage
- Improved the overall network stability.
Firmware Download Link
| Deco X50-5G_V1 | 1.2.1_build20241217_Beta |
Update Advice:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
Please feel free to comment below on how this version works. Thanks in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi David, I'll try that later. Will 1.2.1 be available in the app? Will the older firmware be more stable? The X50-5g v1 is a disaster, I swapped from Archer mr200 a few days ago.
Update
The downgrade to 1.1.5 failed, stuck on uploading.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update. I don't have any other suggestions and would like to escalate your case to the senior engineers for further assistance.
Please check whether you have received my email later.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I just realised today that I'm now getting this in my local network, most probably because of the beta I installed. Why is his happening? It wasn't like this before.
- Copy Link
- Report Inappropriate Content
@David-TP By the way, after about one week using the beta, I see almost no improvements. Network still goes down multiple times a day, and CPU usage is still always at 100%.
- Copy Link
- Report Inappropriate Content
Hi, I don't think this warning is because of using the beta firmware. What is the current OS of your iPhone?
You could refer to the suggestions here to see whether they helped:
https://community.tp-link.com/en/home/stories/detail/500188- Case 2
Update:
For the CPU and network instability, I have checked with the engineer and he will contact you directly via email. Please check whether you could receive his email later.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi all,
same Issue here with CPU utilization @ Deco x50 5G with firmware 1.2.0 Build 20241011
please have a close look to that.
thanks exelsis.
- Copy Link
- Report Inappropriate Content
Hi, since you are still on the 1.2.0 version, have you tried to install the 1.2.1beta in the first post?
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I've just checked the email. It's a support request for remote access (which I usually will decline due to security issues).
Thank you for the help so far with my devices. I have given up and decided to move to Ubiquiti. It's tough to keep dealing with the X50-5G's CPU kept maxing out and going down repeatedly throughout the day and I've had enough with mine.
All the best in solving and fixing the problems.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1141
Replies: 19
Voters 1
