Home Network Community > Deco > Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
< Deco

Beta Software Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization

12

Beta Software Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization

Beta SoftwareDeco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Wednesday - last edited Wednesday
Tags: #Official #Highlighted Thread
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version:

This Article Applied to

Deco X50-5G_V1

 


Optimization and Bug Fixes:

  • Fixed the issue of not detecting the IoT Network.
  • Optimized the CPU Usage
  • Improved the overall network stability.

 

 

Firmware Download Link

Deco X50-5G_V1 1.2.1_build20241217_Beta

Update Advice:

1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
 

 

Please feel free to comment below on how this version works. Thanks in advance.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  1      
 
  1      
 
#1
Options
11 Reply
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Wednesday

  @David-TP 

I will upgrade to this version and report back. My DHCP issues with the previous version could not be fixed by your engineers- they only offered me to downgrade back to 1.1.7, which I did. Lets see if the same occurs on this new version.

  1  
  1  
#2
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Wednesday

  @ShadowLabs 

Good luck! and wait for your further update.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Wednesday

  @David-TP when available IoT and Isolation Device Option at Deco X10 and when available stable version at Deco M4 v2 please update please... 

Sayeem Ahmed
  1  
  1  
#4
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Thursday

  @David-TP 

Hello,

 

I tried to upgrade to this new beta firmware using the web interface, but it doesnt apply the update.

 

When selecting the bin firmware file and clicking "upgrade" and displays the uploading popup as shown below. It doesnt show any progress bar and just disapears after about 10-15 seconds followed by "operation completed" at the bottom of the webpage. It doesnt reboot automatically as the instructions advise and doesn't show that it has applied the new version on a manual reboot.

 

Any advice?



 

 

  1  
  1  
#5
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Friday

  @Franjos 

Hi, Thanks for the feedback.

If you check the current firmware version on the Deco X50-5G, Can you see the version build number change to 1.2.1_build20241217?

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Friday

  @David-TP 

 

Thank you for your response.

 

As mentioned, it doesn't upgrade.  It stays on 1.2.0

 

  0  
  0  
#7
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Friday

  @David-TP so far so good, the stability issues of the previous 1.2.0 have not yet returned. No disconnects or failure of DHCP server yet.

  2  
  2  
#8
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
9 hours ago
Hi, I had the same issue upgrading from 1.1.7 using the web interface. Reporting success but Firmware doesn't upgrade.
  0  
  0  
#9
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
6 hours ago

  @Franjos 

Hi, How about the firmware version in the Deco APP?

It is quite weird since I checked your TP-Link ID, the current firmware for Deco X50-5G is updated to 1.2.1 build 20241217 nowsurprise.

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#10
Options
Re:Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
6 hours ago

  @tap0 

Hi, Are you able to install 1.1.5 here, a lower version than 1.1.7 on the web UI?

https://www.tp-link.com/en/support/download/deco-x50-5g/v1/#Firmware

 

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#11
Options
12

Information

Helpful: 1

Views: 576

Replies: 11

Tags

Official Highlighted Thread
Related Articles
 Deco X50-5G Solid Red /Internet Unstable
2159 0
X50-5G external antennas
1773 2
 Fail to Update the Firmware of Deco X50-5G via Deco APP
1224 0
VPN and CPU
99 1
 How to Configure Cell Lock on the Deco X50-5G
173 0
Deco X50-5G v1.2.0
185 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.