Deco M5 mesh slaves with separate SSID and no password
Hello
Have just completed a reset and reconfiguration of 3 x Deco M5.
Main unit in Router mode plus 2 wireless mesh slaves.
After setup, the 2 wireless slave present separate open wifi ssids (no password required) while the main ssid is correctly protected by defined WPA2 password
Guest network in NOT active.
How do I reconfigure the 2 slave units to replicate the main SSID and require password?
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question here.
When adding satellite Decos, please power them on one by one near the main Deco in the same room, then following this guide to configure.
After two Decos are added successfully, you may relocate them to their original places.
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
When adding satellite Decos, please power them on one by one near the main Deco in the same room, then following this guide to configure.
After two Decos are added successfully, you may relocate them to their original places.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 78
Replies: 1
Voters 0
No one has voted for it yet.