Ipv6 not working on lan after latest Firmware Update

Ipv6 not working on lan after latest Firmware Update

Ipv6 not working on lan after latest Firmware Update
Ipv6 not working on lan after latest Firmware Update
a week ago - last edited a week ago
Model: Archer VR2100v  
Hardware Version: V1
Firmware Version: 1.18.0 0.9.1 v009e.0 Build 241018 Rel.43535n

Hello i have a problem with the ipv6 on LAN side after the firmware update. Ipv6 is not working anymore. Sometimes it works few seconds after is gone ( packet loss on ipv6 ping) on the wan side is there. Please assist. Thank you!

  0      
  0      
#1
Options
7 Reply
Re:Ipv6 not working on lan after latest Firmware Update
a week ago - last edited a week ago
  0  
  0  
#2
Options
Re:Ipv6 not working on lan after latest Firmware Update
a week ago - last edited a week ago

  @Daniel3355 

 

Hi, thanks for posting question here.

May I confirm some information to understand your situation?

1.  Who is your ISP?

2. Does the Archer VR2100v work through ADSL or VDSL2? 

3  How about your configuration parameters? What is the internet connection type and is there any VLAN ID required?

4. Is the network accessed under DS-Lite line or dual-stack?

 

It is suggested to downgrade to the previous firmware from the official website  as a workaround. It is the same method as updating firmware

 

 

 

 

  0  
  0  
#3
Options
Re:Ipv6 not working on lan after latest Firmware Update
a week ago

  @Marvin_S Hi Marvin, the isp networking is dual-stack and i receive the Connection and the IPv6 ip. The problem is on lan side on the iPhone device. It transfer the ip address , but the router ip fe80::1 is shown, gone, shown, gone on the iPhone. I installed the older firmware version 1.17.0 0.9.1 v009e.0 Build 230831 Rel.3356n and everything is working fine. IPv6 ip and router ip fe80::1 are stable on the iPhone, und ipv6 test works.

  0  
  0  
#4
Options
Re:Ipv6 not working on lan after latest Firmware Update
a week ago - last edited a week ago

  @Daniel3355 

 

Hi, thanks for your sharing~

Who is your ISP?

 

  0  
  0  
#5
Options
Re:Ipv6 not working on lan after latest Firmware Update
a week ago - last edited a week ago

My isp is telekom vdsl2 and vlan 7. Setting is dhcpv6. The openvpn server is on. I did not do anything on the settings from over a year. After updating, I noticed that IPv6 is not working. After rollback to previous firmware IPv6 is working. The same setup.

  0  
  0  
#6
Options
Re:Ipv6 not working on lan after latest Firmware Update
a week ago

  @Daniel3355 

 

Hi, thanks for your sharing~

We will update here once there is a solution.

Thanks for your waiting!

  0  
  0  
#7
Options
Re:Ipv6 not working on lan after latest Firmware Update
Tuesday

  @Daniel3355 

 

Hi, thanks for your waiting.

I have sent you the beta firmware via the "Message" window. It is suggested to upgrade it for a try.

 

 

  0  
  0  
#8
Options