Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS

Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS

Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
2 weeks ago - last edited a week ago
Model: Archer T2U Nano  
Hardware Version: V1
Firmware Version:

Hi all,

I recently purchased the TP-Link AC600 Archer T2U Nano wireless USB adapter, but I am unable to get it to work on my Dell Inspiron 3583 running Ubuntu 24.04.1 LTS.

Here’s what I’ve tried so far to install the driver:

  1. Followed the instructions here: AskUbuntu Thread.
  2. Used the source from this repository: aircrack-ng/rtl8812au.
  3. Installed via apt: `sudo apt install rtl8812au-dkms`.

The adapter is recognized by my system, but I cannot detect any Wi-Fi networks. For comparison, my TP-Link Archer T4U adapter works perfectly fine under the same conditions.

Any advice or suggestions to resolve this issue would be greatly appreciated!

Thanks 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS-Solution
a week ago - last edited a week ago

If you're having trouble, this worked well for me:
https://github.com/morrownr/8821au-20210708  

Recommended Solution
  0  
  0  
#7
Options
7 Reply
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
2 weeks ago

  @bna 

 

Hi,

 

By "the adapter is recognized by my system" do you mean your T2U Nano shows up when running commands like "nmcli" or "iw list"?
 

  0  
  0  
#2
Options
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
2 weeks ago

  @woozle 

The driver is loaded correctly:

$ sudo dmesg | grep 8812au
[ 2347.697150] RTL871X: rtl8812au v4.3.8_12175.20140902
[ 2347.697258] usbcore: registered new interface driver rtl8812au
 

T2U Nano doesn't shows up when running "nmcli". 

  0  
  0  
#3
Options
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
2 weeks ago - last edited 2 weeks ago

  @bna 

 

Ok. I've just tested this aircrack-ng/rtl8812au driver myself with an Archer T4U V2 and Ubuntu 24 and what I am seeing is that the T4U shows up in the GUI but it's scanning forever and not finding any Wi-Fi networks. Is that also what you are seeing with your Archer T2U Nano?

 

So I think this particular driver somehow doesn't work with Ubuntu 24 and you might want to look for another driver, perhaps this one https://github.com/morrownr/8812au.

 

By the way, is the Archer T4U you mentioned previously a V2 or V3? Only the Archer T4U V2 (and probably also V1) can use rtl8812au drivers. The Archer T4U V3 uses the rtl8812bu, for which drivers have already been built into newer Linux kernels (starting with version 6.2 I believe).
 

  0  
  0  
#4
Options
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
2 weeks ago - last edited a week ago

  @woozle 

 

Exactly! The adapter appears in the GUI, but it keeps scanning without finding any Wi-Fi networks.

 

The GitHub repository you shared redirects to: https://github.com/morrownr/8812au-20210820. Is it safe to install? 

 

Although it was made in 2024, it still states "Ver: 1.0" in the box.

 

  0  
  0  
#5
Options
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
a week ago

bna wrote

 

The GitHub repository you shared redirects to: https://github.com/morrownr/8812au-20210820. Is it safe to install? 

 

  @bna 

 

This driver is no more or less safe to install than the other one you tried previously. It's always the same story. Realtek (the company who makes the Wi-Fi chip) originally made a driver for Linux, but stopped developing the driver further several years ago, which lead to the driver becoming outdated and incompatible with newer Linux kernels. However, Realtek made the source code for the driver available to the public and this allowed some independant developers to modify the driver to work with newer Linux kernels.

 

Out of interest I've just installed the driver from https://github.com/morrownr/8812au-20210820 in my Ubuntu 24 and my Archer T4U V2 (the one with the rtl8812au chip) seems to work fine with it, so I think the driver should also work fine with the rtl8811au chip in your T2U Nano.

  1  
  1  
#6
Options
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS-Solution
a week ago - last edited a week ago

If you're having trouble, this worked well for me:
https://github.com/morrownr/8821au-20210708  

Recommended Solution
  0  
  0  
#7
Options
Re:Issue with TP-Link AC600 Archer T2U Nano on Ubuntu 24.04.1 LTS
13 hours ago - last edited 13 hours ago

  @bna 

Pop OS Ubuntu 22.04 LTS all up to date.

 

Setting up rtl8812au-dkms (4.3.8.12175.20140902+dfsg-0ubuntu17~22.04.2) ...
Removing old rtl8812au-4.3.8.12175.20140902+dfsg DKMS files...
Deleting module rtl8812au-4.3.8.12175.20140902+dfsg completely from the DKMS tre
e.
Loading new rtl8812au-4.3.8.12175.20140902+dfsg DKMS files...
Building for 6.9.3-76060903-generic
Building initial module for 6.9.3-76060903-generic
ERROR (dkms apport): kernel package linux-headers-6.9.3-76060903-generic is not
supported
Error! Bad return status for module build on kernel: 6.9.3-76060903-generic (x86
_64)
Consult /var/lib/dkms/rtl8812au/4.3.8.12175.20140902+dfsg/build/make.log for mor
e information.
dpkg: error processing package rtl8812au-dkms (--configure):
 installed rtl8812au-dkms package post-installation script subprocess returned e
rror exit status 10
Errors were encountered while processing:
 rtl8812au-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
tyler@pop-os:~$

 

  0  
  0  
#8
Options