New Release New Features Arrived! Channel Selection and Wireless Network Mode
New Release New Features Arrived! Channel Selection and Wireless Network Mode
This Article Applies to:
Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter
Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
With the latest 1.1.0/1.1.1 firmware release of Deco BE85/BE65/BE63/BE11000, The historically highly-requested feature- Channel Selection has now been implemented. It allows users to manually choose the Wi-Fi channel/channel Width for the Main WiFi Network(2.4GHz& 5GHz), providing greater control over network performance in high-interference environments.
How to Configure wireless Channel Selection?
Go to Deco APP> Wi-Fi Settings, and Select 2.4GHz & 5GHz Wireless Network. You will find the option to adjust the channel and channel width settings under the Advanced section.
Furthermore, an extra feature- Wireless Network Mode is also added to further improve the overall Mesh Performance.
Optimal Performance- All Deco units will enable the 2.4GHz backhaul and use the same 2.4GHz channel to maximize the wireless backhaul connection speed, then improve the overall network bandwidth.
High Capacity- The Deco system will disable the 2.4G backhaul and All Deco units use different 2.4GHz channels. This mode will improve the 2.4GHz wireless capacity and accommodate more 2GHz clients.
So if you have plenty of 2GHz smart home devices, it is recommended to use the High Capacity mode.
We welcome your feedback on any issues you may have encountered or if you have suggestions for optimizing these two features. Your input will greatly assist in enhancing and expediting the implementation of similar features on other Deco models. Feel free to share your thoughts below!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@ARGamingPK1 thanks for the info! Is there any chance for a firmware update which would allow channel selection?
- Copy Link
- Report Inappropriate Content
So to note with these features if you have capacity mode on and manually set your channel for the 2.4 wifi then all decos with have the manually set Channel rather then different channels for each. I prefer it this way as just the channel selection and turning off backhaul was more then enough to fix my 2.4 network. I think a third option should be added to allow the 2.4 to keep the same channel even when on auto channel should someone choose to configure it that way.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 3692
Replies: 13
Voters 2
