Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > How to know if MU-MIMO technology is working in my Deco X20 devices ? any way to track ?

< Deco

How to know if MU-MIMO technology is working in my Deco X20 devices ? any way to track ?

How to know if MU-MIMO technology is working in my Deco X20 devices ? any way to track ?

How to know if MU-MIMO technology is working in my Deco X20 devices ? any way to track ?

a week ago

Posts: 19

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2024-10-09

How to know if MU-MIMO technology is working in my Deco X20 devices ? any way to track ?

a week ago

Tags: #Network Connectivity

Model: Deco X20

Hardware Version: V3

Firmware Version:

I recently bought Deco X20 devices. I am using it in Access point mode.

How do I know that this MU-MIMO technology is working ? how do I see it in action ?

any way to check whether MU-MIMO is working on Deco x20 device or not ?

also how different is MU-MIMO technology from QOS technology ?

0

0

#1

1 Reply

a week ago - last edited a week ago

Posts: 12460

Helpful: 1722

Solutions: 1200

Stories: 9

Registered: 2020-04-14

Re:How to know if MU-MIMO technology is working in my Deco X20 devices ? any way to track ?

a week ago - last edited a week ago

Hi, nice to see you again.

Deco X20_V3.0 is 2*2 MU-MIMO for both 2.4GHz and 5GHz. It could be told from the current wireless link/PHY rate.

Most of the mobile devices are also 2*2 MU-MIMO and when they are connected to Deco X20, the link speed should be about 574 Mbps over 2.4GHz band; and 1201 Mbps over 5GHz band.

And for the second question: how different is MU-MIMO technology from QOS technology？

I barely see people compare them together. Do you have any specific aspects or usage scenarios?

MU-MIMO is enabled by default on the Deco and QOS is not supported when Deco is set to Access Point mode.

Thank you very much and Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

0

0

#2