Official Release Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
This Article Applied to:
Deco BE65/BE63/BE11000_V2
Modifications and Bug Fixes:
1. Added Wireguard VPN feature.
2. Added HomeShield APP block/App Time Limits feature, which supports 2000+ applications.
3. Added Channel Selection feature.
4. Added to the option to enable/disable 2.4GHz Backhaul Mode.
5. Improved stability and security of the system.
6. Fixed the issue that satellite units might be displayed as "offline" in Deco APP if there are lots of Tapo devices in the network.
7. Fixed the issue that the clients may fail to connect to L2TP/IPSec VPN in some cases.
8. Fixed the issue that the Guest wireless may be unable to access the Internet in some cases.
9. Fix the issue of broadcasting additional Backhaul SSID after enabling 6 GHz Wi-Fi.
Firmware Download Link:
| Deco BE65_V2 | Deco BE65_V2_1.1.0_240923.zip |
| Deco BE63_V2 | Deco BE63_V2_1.1.0_240923.zip |
| Deco BE11000_V2 | Deco BE11000_V2_1.1.0_240923.zip |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery - How to Downgrade Deco.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP This upgrade to the BE65 firmware (running as my main deco) has caused instability with my 3 x55 v1 deco satellites. The x55s now constantly go offline, solid yellow and reconnect, then go offline again. Have tried rebooting and removing and adding x55s but has not solved it. x55s on 1.5.5 Build 20240718 Rel. 44414. I see there is later x55 firmware but this has not been pushed out yet. Not sure if that will solve the issue. Any suggestions please? Thanks
- Copy Link
- Report Inappropriate Content
@David-TP Is the BE65 Pro going to get any of these features? It seems to be quite lacking for the moment.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
May I know who your internet service provider is?
What is the current internet connection type under Deco APP>More>Internet, Dynamic IP, or PPPoE?
How often would the satellite Deco units drop out(LED from solid green to yellow, then back to green)?
Later, I'd like to follow up on your case via email. Please check whether you have received my email.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Hi, yes, Deco BE65 Pro will get a similar firmware update. It should be ready in the next few weeks.
Best regards.
- Copy Link
- Report Inappropriate Content
David-TP wrote
Hi, yes, Deco BE65 Pro will get a similar firmware update. It should be ready in the next few weeks.
Best regards.
Will the firmware update for the BE65 Pro also include the "Fing Client Identification"? I still have a few clients on my network which I have no idea what they are.
- Copy Link
- Report Inappropriate Content
@David-TP will the channel selection function be added to x50 v1?
- Copy Link
- Report Inappropriate Content
Hi, the release note of Deco BE65 Pro_1.1.0 hasn't mentioned "Client Identification' and I think it hasn't included this feature yet.
@xplodzs , Hi, nice to see you again. There hasn't been any updated news about a similar feature on the Deco X50 yet. For now, the Channel Selection is only added to the WiFi 7 Deco models. If there is any further news later, I will update it in the community as soon as possible.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP or anyone else...have you guys seen any issues with slow internet speeds since this update? I'm asking because it seems like in the past couple of days since I did the update, I've gone from great internet speeds with wired and wireless devices, so getting maybe 20-25% of my advertised speed (400-500 Mbps) vs the 2.4 GBPs I pay for and can normally pulled with a wired device. I tried bypassing everything and plugging a wired device straight into the main router, but I still get terrible speeds. The weird thing is if I run the speed test inside the Deco app I see the normal 2.35 Gbps I expect to see, but I can't get that with any of the nodes on my network or when attached directly to the router. Thanks for any help/insight you can provide.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
Are you able to constantly produce this issue on different devices?
"I've gone from great internet speeds with wired and wireless devices, so getting maybe 20-25% of my advertised speed (400-500 Mbps) "
Please also check the QOS settings on the Deco BE65. Make sure it is disabled or set to 2.5Gbps download/upload.
It is also suggested to make sure UPNP is disabled under Deco APP>More>Advanced>NAT forwarding.
After that, also try to restart the main Deco and ISP Fibre modem once.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Hi, is there any new on when the BE65 V1 models will receive the update?
Frustrating to have to wait when the hardware difference between V1 and V2 is minor.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2722
Replies: 26
Voters 0
No one has voted for it yet.