Home

Forums

Stories

Knowledge Base

Home Network Community > DSL Modem Routers > Archer VR1210V ipv6 on LAN doesn't work with latest firmware

< DSL Modem Routers

Archer VR1210V ipv6 on LAN doesn't work with latest firmware

Tadiern_80

2024-11-04 11:30:03 - last edited 3 weeks ago

Posts: 8

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2024-06-17

Archer VR1210V ipv6 on LAN doesn't work with latest firmware

2024-11-04 11:30:03 - last edited 3 weeks ago

Tags: #IPv6

Model: Archer VR1210v

Hardware Version: V1

Firmware Version: 2.0.0 0.10 v6041.0 Build 240708 Rel.13164n

After upgrading my router to the firmware 2.0.0 0.10 v6041.0 Build 240708 Rel.13164n, local network devices couldn't get the IPv6 address, while the IPv6 seemed OK on the router web interface. Previously, it was working.

Downgrading to Archer VR1210v 1.0_2.0.0 0.9 v6041.0 Build 221027 Rel.12900n.bin, with no changes on the web interface, I was able to get IPv6 on my Windows PC in the LAN. Now IPv6 works flawlessly.

Seems like the latest firmware isn't able to manage the IPv6 addresses to the LAN network devices.

I'm using RADVD, RDDNS, Site Prefix Delegated.

Please advise and fix in a new firmware.

3 Reply

Marvin_S

2024-11-06 02:15:04 - last edited 3 weeks ago

Posts: 2602

Helpful: 185

Solutions: 508

Stories: 0

Registered: 2022-05-09

Re:Archer VR1210V ipv6 on LAN doesn't work with latest firmware

2024-11-06 02:15:04 - last edited 3 weeks ago

@Tadiern_80

Hi, thanks for posting question here.

As we can see on the official website, Archer VR1210v is a customized model by some local ISPs. It is a pity that we can know much less than common DSL modem routers.

For the question you feedback, it is sincerely suggested to contact local technical support directly for more efficient help.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

Tadiern_80

LV1

3 weeks ago

Posts: 8

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2024-06-17

Re:Archer VR1210V ipv6 on LAN doesn't work with latest firmware

3 weeks ago

@Marvin_S what you wrote about that version is nonsense to me. I can't find anything on the website stating that is a customized version for some ISP. The modem/router is generic and has no reference to specific ISP. I bought it from Amazon, didn't come with ISP subscription.

Also, I am installing standard firmware versions from official TP-Link product support pages. The latest firmware on the website doesn't work with ipv6 while the previous one does work.

Marvin_S

2 weeks ago - last edited 2 weeks ago

Posts: 2602

Helpful: 185

Solutions: 508

Stories: 0

Registered: 2022-05-09

Re:Archer VR1210V ipv6 on LAN doesn't work with latest firmware

2 weeks ago - last edited 2 weeks ago

@Tadiern_80

Hi, sorry for confusing you.

Here is what we can see from the officail website, and this is what we searched on the official website.

So that was why the suggestion was shared to contact local technical support team directly.

Or you may submit a support ticket via email for efficient assistance. Please include your Forum ID, community nickname, a detailed description of the issue, and the troubleshooting steps you've taken in the subject line or body of your email. Thank you.

Archer VR1210V ipv6 on LAN doesn't work with latest firmware

Archer VR1210V ipv6 on LAN doesn't work with latest firmware

Information

Voters 0

Tags