unseen switches
I have this new be550. I have cascaded switches always tplink 2.5gb. Access points are connected to the switches but I don't see them in my network. Why?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Could you provide the model number of your switches and your network topology? Do you mean you cannot see the back end devices connected to the switches?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@JohnGhost update: restarting the tp link the access point is visible again. why?
- Copy Link
- Report Inappropriate Content
Hi,
It is recommended to set the backend devices to automatically obtain an IP address via DHCP, and also reserve an address for the AP on the main router.
This can help the main router detect the connected backend devices and display them in the device list.
- Copy Link
- Report Inappropriate Content
I attach a screenshot of the tplink 8980 connected via LAN.
All right? It makes me manually enter the IP address.
It seems like I have to enter a static IP...
how should I set it up?
- Copy Link
- Report Inappropriate Content
UP
the device disappeared again in the device list, but can be reached from the ip address.
- Copy Link
- Report Inappropriate Content
For the TD-W8980, the settings should be correct to function as an Access Point by disabling the DHCP server and assigning a static IP address.
Could you please explain why you need it to appear in the BE550's Client List? To be honest, it's an older model, it’s challenging for us to determine how it operates in this configuration and why it might not be detected properly by the gateway router.
- Copy Link
- Report Inappropriate Content
yes I needed to see the 8980 in the device list to check traffic and give priority..
I configured it as you said..
too bad I can't see it.. except for a short time after the reboot..
so they are not ''compatible''?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 317
Replies: 9
Voters 0
No one has voted for it yet.