2,4G

2,4G

2,4G
2,4G
2024-10-22 00:50:49 - last edited Monday

Bună!

Ma poate ajuta cineva?

Am cumpărat un Tp- link Archer A64 care este pus după ONT ul de la Digi. Problema este ca sunt frecvent deconectate de la net atât 5 G dar mai ales 2, 4 G, când vreau să mă conectez din nou , nu îmi recunoaște parola- apoi după multe încercări uneori , sau după ce contactez departamentul deranjamente , ma pot conecta . Țin sa menționez ca problema deconectarii de la internet o aveam și anterior ,când eram doar cu ONT ul de la Digi .

Poate cineva sa imi spuna o cauza posibila?

  0      
  0      
#1
Options
1 Accepted Solution
Re:2,4G-Solution
2024-10-23 02:20:52 - last edited Monday

  @Nic0l3ta 

Hi,

 

Yes, 2.4G channel width please change to 20MHz. And 40MHz or 80MHz on 5G.

Besides, please also check the firmware is the latest or not. You can update to the latest firmware version.

 

I am unsure whether flashing green light on Digi ONT means it is working normally. You can check the internet light on the router.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:2,4G
2024-10-22 08:01:20

  @Nic0l3ta 

Hi,

Thanks for posting on TP-Link Community.

 

How about the LED status on the router when it drops WIFI connection? Will the wired devices get internet normally?

If all wireless devices drop randomly, please change the WIFI channel and channel width.

If you cannot connect the wireless devices back after they drop, please forget the network and then connect again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:2,4G
2024-10-22 13:31:26

  @Soare Thank you!

The Led status is solid green, my laptop says that it is unable to connect to that network and my smartphone says that the password is wrong; that isn't True. I forgot the network and tried again but I didn' t manage facing with the same replies.  I am sure it is something that causes this,  I don' t think it is normal to stay in front of the network changing channels. 

I also can see a flashing green led (LAN1)  on Digi ONT, if this matters.

By the way, if you are kind,  the channels for 2, 4 are 1, 6 and 11 but I don't know for sure the bând width ...20?

  0  
  0  
#3
Options
Re:2,4G-Solution
2024-10-23 02:20:52 - last edited Monday

  @Nic0l3ta 

Hi,

 

Yes, 2.4G channel width please change to 20MHz. And 40MHz or 80MHz on 5G.

Besides, please also check the firmware is the latest or not. You can update to the latest firmware version.

 

I am unsure whether flashing green light on Digi ONT means it is working normally. You can check the internet light on the router.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options