Deco S7 mesh with AX1800 Wi-Fi 6

Deco S7 mesh with AX1800 Wi-Fi 6

Deco S7 mesh with AX1800 Wi-Fi 6
Deco S7 mesh with AX1800 Wi-Fi 6
2024-10-12 12:17:04
Model: Deco S7   Archer AX1800  
Hardware Version: V1
Firmware Version: 1.4.5

Hi all,

I recently purchased a Deco S7 mesh system and I already have a TP-Link Archer AX1800 Wi-Fi 6 router set up as my main router. I’m wondering if it’s possible to integrate the Deco S7 units with the AX1800 in a mesh setup.

Specifically, I’d like to know:

  • Can the Deco S7 act as satellite units to extend the Wi-Fi coverage from my AX1800 router?
  • Will they all work together seamlessly in one mesh network, even though the AX1800 supports Wi-Fi 6 and Deco S7 is Wi-Fi 5?
  • Are there any specific settings I need to configure to ensure compatibility?

Any advice or steps on how to achieve this would be greatly appreciated!

 

  0      
  0      
#1
Options
3 Reply
Re:Deco S7 mesh with AX1800 Wi-Fi 6
2024-10-14 03:06:33

  @JirkaSmajlik 

Hi,

 

Deco S7 can be connect to the AX1800 to extend the network. To avoid double NAT issue, you can set it as AP mode. 

But it cannot build Mesh network with Archer AX1800 router.

 

You can refer to this thread to know more information.

TP-Link Deco Mesh vs EasyMesh vs OneMesh vs Omada Mesh What's the Difference?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Deco S7 mesh with AX1800 Wi-Fi 6
2 weeks ago - last edited 2 weeks ago

  @Sunshine Your link doesn't work, can you check it again?

Which would be in AP-mode, Deco or AX1800?

 

Why cant it build a Mesh network together, it says on the homepage : 

AX1800 Dual-Band Wi-Fi 6 Router

  • OneMesh – Use with OneMesh extenders to get whole-home coverage and enjoy smooth roaming between signals.

 

For me it sounds like they should be compatible with each other, but maybe I'm wrong, is it different kind of Mesh-systems...?

 

Now I connected the Deco S7 on lan4 on the AX1800 som I can get Mesh in the house, but I feel that Deco and AX1800 should find each other so I don't need to have a wire on one off the Deco's....

  0  
  0  
#3
Options
Re:Deco S7 mesh with AX1800 Wi-Fi 6
2 weeks ago

  @R0ffe 

Hi,

 

This is the link: https://www.tp-link.com/en/blog/1296/

If it still cannot work, you can just search the title. TP-Link Deco Mesh vs EasyMesh vs OneMesh vs Omada Mesh What's the Difference?

 

Deco devices are using Deco Mesh. They are using different Mesh technology. Therefore it cannot build a Mesh system with OneMesh routers.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options