Deco X50 Integration into FRITZ!Box 7530 AX Mesh

SebSch

2024-09-25 09:01:02

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-25

Deco X50 Integration into FRITZ!Box 7530 AX Mesh

2024-09-25 09:01:02

Model: Deco X50

Hardware Version:

Firmware Version:

Hi all!

recently i received my new FRITZ!Box 7530 AX and two Deco X50 from my service provider. I understood that I can setup one X50 that is connected via LAN as my Mesh Master, and use the second one as Mesh Repeater. Doing so, i need to disable the WIFI of my FritzBox.

As the FritzBox also supports mesh, I am wondering if it is also possible to use the FritzBox as my Mesh Master and both X50 as Mesh Repeaters. I would prefer this setup due to the fact, that i would have three active WIFI devices allowing better coverage of my home.

I would be happy if you could help me in realizing that setup!

best,

SebSch

1 Reply

David-TP

2024-09-26 03:26:51

Posts: 12781

Helpful: 1792

Solutions: 1294

Stories: 9

Registered: 2020-04-14

Re:Deco X50 Integration into FRITZ!Box 7530 AX Mesh

2024-09-26 03:26:51

@SebSch

Hi, welcome to the community.

Many Brands would have their own dedicated Mesh protocol. Currently, I only noticed AVM recommended using their own models to establish a Mesh network:

https://en.avm.de/service/knowledge-base/dok/FRITZ-Box-7530/3361_Which-FRITZ-products-support-Mesh/

So I'm afraid you might still need to wire the first main Deco via an Ethernet cable to the FRITZ!Box 7530

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Deco X50 Integration into FRITZ!Box 7530 AX Mesh

Deco X50 Integration into FRITZ!Box 7530 AX Mesh

Information

Voters 0

Tags