@tay2cool 

Download your firmware here: https://www.tp-link.com/en/support/download/deco-x60/v3/#Firmware

Follow this guide to downgrade (method 2, http): https://www.tp-link.com/en/support/faq/2958/

Be patience when the Decos are booting back up after downgrade. Particularly the main Deco that needed internet cable to turn green. Satelite decos became green after couple minutes.

Here is a nice sheet for the LED color statuses: https://static.tp-link.com/upload/manual/2023/202311/20231121/7106509732_Deco%20Router%20(37%20Languages)_QIG_V1_2.4G%2b5GBand1&Band2%20(10).pdf

Yet another unsuccesful version update here. My three X60 V3.2 (EU) units got the OTA update yesterday. Update itself went smoothly, but after that, the internet was incredibly slow (few hundreds of KBs here and there) and practically useless. I had to downgrade to 1.2.5 Build 20240106 (I used to have 1.2.9), as it was the latest I could find. Now everything works again as expected. Does anyone know where I could find the version 1.2.9 for the model in question? I managed to find that only for V3, not V3.2.

  @JackRs 

sorry, i cannot find 1.2.9 for V3.2 either.

If you ask your devices to upgrade, do they upgrade directly to 1.3.0?

long shot but maybe they go through 1.2.9.

  @Andre3000 Unfortunately the device upgrade offers directly 1.3.0.

  @David-TP 

Hi David,

Hi I have deco x60 (2pack) v3.2 (europe) , and today I updated them to 1.3.0 Build 20240830 rel.50008
Deco app (version 3.8.69) shows zero traffic but when I choose the devices I can see traffic. I mean the overall trafic shows 0 but each device shows traffic.

Is it a bug of the app?

Also as far as I knew, deco x60 didn't support 160mhz on 5ghz but now the app it shows the option.
So version 3.2 supports 160mhz???

thank you in advance!

David-TP wrote

  @Andre3000 

@bartekw 

Hi, Thank you very much for the feedback.

Deco X60_V4.2 doesn't share the same firmware bin file as Deco X60_V3. The latest firmware for Deco X60_V4.2 is still 1.2.9 and there will be a similar 1.3.0 version for V4.2 later.

 

 

I'm sorry that I didn't catch your feedback the first time. If later, you plan to install the 1.3.0 official version again, please save the system logs first if anything unusual happens before reverting to 1.2.9.

I will keep checking whether there might be similar feedback later.

Thanks again and best regards.

 

  @David-TP 

are you sure? As far as I know, X60 V3, V3.2 and V4.2 share the same firmware.

  @David-TP 

No, Deco X60 V3.0 US does support 160MHz. For mine unit it was enabled by default. And after 1.3.0, I have Option for 80 Mhz/ 160Mhz. 

P.S. - Can you check what what? Becauze at least i think V3.2 is just naming change for x60 from AX3000 to AX5400... Or have i got some kind of Frankensteined unit from ur factory? 

 
@David-TP 
 

David-TP wrote

  @bezoss 

Hi, Deco X60_V3.2/V4.2 support 160MHz, but V3 doesn't.

 

As for the Deco APP real-time rates, it records the local data transfer connection through Deco and doesn't refer to the actual Internet download speed.

Usually, the numbers here are for reference only. For the whole Mesh system or a specific Deco, there are in- and out-packets and occasionally you would see "0" on the APP.

Thank you very much and best regards.

 

 

Good Morning David,

thanks a lot for your reply!

I know it shows the local data transfer, but the local nodes show speed and the overall stays always zero (ios app and android app same behaviour)
and this happens after the update 1.3.0

Please check the screenshot i provided :)

thanks again!