Official Release Deco X60_V3/3.2/4.2-1.3.0 Supports ECO Mode,WireGuard VPN and WiFi Access Control
This Article Applied to
Deco X60(EU/US/JP/SG)_3.0; Deco X60(SE)_3.2;Deco X60(EU/US)_4.2
Download Links
| Deco X60(EU/US)_V3.0 | 1.3.0_build_20240830 | Newly updated to 1.11.0 Platform |
| Deco X60(SG)_V3.0 | 1.3.0_build_20240830 | |
| Deco X60(SE)_V3.2 | 1.3.0_build_20240830 | |
| Deco X60(EU/US)_V4.2 | 1.3.0_build_20240830 |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery - How to Downgrade Deco.
4. How to identify the hardware version:How to find the hardware version on a TP-Link device
Modifications and Improvements
- Added Camera Security
- Added Whitelist/ Wi-Fi Access Control
- Supported Detection for Ethernet connection speed.
- Supported Captive Portal for Guest Network
- Supported TSS (TP-Link Simple Setup) Auto Discovery & Quick Configuration
- Added ECO Mode(Wi-Fi Schedule)
- Added Firmware Auto Update.
- Supported Matter
- Supported TKIP protocol for Tapo smart devices
- Advanced Parental Control subscription added APP block/App Time Limits feature, which supports 2000+ applications.
- Supported WireGuard VPN Server/Client.
- Supported built-in easy configuration of NordVPN/Surfshark VPN.
*In compliance with local regulations, the Third-party VPN feature may be restricted to specific regions.
- Added client speed limit under clients' detailed settings page.
- Supported Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
- Added Scene Priority under QOS.
- Added Client MAC Identification to improve the accuracy of device detection.
- Added more device types under Smart Home, such as Tapo/Kasa Light Strips.
- Supported uploading/downloading OpenVPN client certificates with customized filenames.
- Optimized overall network performance
Bug Fixes
- Fixed some bugs and enhanced security vulnerabilities.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@azafrak Are you sure 160 MHz Channel width selection was absent before?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@azafrak Can you check ping time and packet loss with 80MHz channel width for 5Ghz channel. Becauze my whole problem with x60 has been in mid to low 5Ghz channel signal strenght, the ping time starts spiking. And much as tried to search documentation about 160 MHz vs 80Mhz - it's only recommended if u are in direct line of sight with AP or need that excess speed.
- Copy Link
- Report Inappropriate Content
@David-TP with regards to the added support for Matter in this update, Can you advise on whether the X60 will then have the ability to "commission" a Matter device once added, and then put the device into "pairing mode" so it can be added, in my case to a Hubitat C8 hub, Thanks
Regards,
Steven
- Copy Link
- Report Inappropriate Content
Hello,
since the update to 1.3.0, I no longer receive push notifications via the Android Deco app when a new device connects to the network. I had the same problem with the X50 V1 after the update to 1.5.5. Can you check this please? Thanks.
best regards
Paul
- Copy Link
- Report Inappropriate Content
Hi, Do you plan to manage the added Matter devices under "Smart Home" on the Deco APP via Hubitat C8 hub?
- For example, Tapo P110M was added through Matter on the Deco APP and Hubitat C8 hub was also connected to Deco Wi-Fi. You wish Deco being able to entrust the P110M to Hubitat C8 hub.
There hasn't been tested yet.Most of the cases I have received is to manage the Matter supported devices through Deco APP directly. So I don't think it is available now.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi, Would there be any notifications inside the Deco APP>Message?
Could you please install the beta APP here to see whether it helped:
Deco APP 3.8.36 --- Greatly Optimized Network Management Experience
If not, please refer to this link to help me submit the Deco APP log:
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi
thank you very much for the answer.
Yes, notifications about new devices are displayed inside the app.
I just installed the beta app and connected a new device but i dont recieve any push notification.
I sent you the app log.
best regards
- Copy Link
- Report Inappropriate Content
@David-TP By Mater support, what does that reffer to? Can the Deco act as a Matter Hub or is IPv6 enabled and Thread support?
- Copy Link
- Report Inappropriate Content
Hello again,
1. Sometimes devices from the guest network that are offline are displayed in the offline list under the main network.
2. After a restart of my Deco, one device (TV GQ65S90CAT in the picture) no longer showed me which frequency band (2,4 or 5 GHz) it is connected to. After a second restart, the second device (SB HW-Q810GC in the picture) was also not displayed and them are still not displayed. The connection symbols are also missing in the overview of connected devices. So far, the error has only occurred with Samsung (TV and Soundbar) devices in my case. The devices still work perfectly in the network. Im still using android beta app.
after second restart:
Best regards
Paul
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 3745
Replies: 81
Voters 1
