@Marvin_S 

Hi Marvin, Thanks for you reply.

I have already turned off the power saving mode as i want the devices on all the time anyway. I have connected my AV600 Passthrough Powerline Adapter directly to my router. And i have paired another AV600 Passthrough Powerline Adapter in my office. The internet works but I cant connect to my local web and mail servers. I can however connect to my local servers over WiFi directly through my router. This would suggest the issue is with the Powerline Adapters and not the router. Pinging my servers local ip address while connected through the Powerline Adapter fails. Pining my servers local ip address over WiFi works. Wired Ethernet connections also allow access to the local servers. Just the Powerline adapters don't.
 

The model number of the powerline adapters is: TL-PA4010P KIT. Ver: 4.0

The model number of the router is:
Firmware Version:1.5.0 0.9.1 v00a1.0 Build 220321 Rel.60385n Hardware Version:Archer VR400 v3 00000002

Thanks again for any help

  @TPLBaldman 

Hi,

Have you verified that the Ethernet card of the computer hasn't been isolated via some access control feature of your router?

Would it be possible for you to connect the office computer to the router directly via Ethernet cable (I mean just for a test), without using the Powerline adapters?

I own a TL-PA4010P KIT Ver: 2.2 and it doesn't show the behavior you've described.

  @woozle 

Hi Woozle,

Yes, I've tried connecting my office computer directly to the router via Ethernet cable and it works fine. Its only when connecting through the powerline adapters it doesn't work. I've also tested this on other computers with the same result. It's very strange. 

I thought maybe a firmware update might fix it, but I haven't been able to find any updates. I've installed the PowerLine Utility. And the ability to update is there. I just cant find any update files online.

  @Marvin_S

Hi Marvin,

I have reset them multiple times. They're currently running with the default settings and with power saver mode off. They have always done this ever since i bought them over a month ago.  I have tried other power points with the same problem. Could it be something in the router preventing connections from the powerline adapters?..

Also, do you know if there's a firmware update available. I can't find any updates at all?

Hi,

I thought i'd come back and let everyone know what happened.

After some trial and error I found that I needed to pair the server and the router powerline adapters separately from the rest. In total I have four powerline adapters. So I paired one adapter on the router with the one on the server. Then the other two I left unpaired, but one of those is also attched to the router.

Adapter 1 attached to the router (Paired with adapter 2)
Adapter 2 attached to the server (Paired with adapter 1)

Adapter 3 attached to the router (unpaired)
Adapter 4 attached to the Office PC (unpaired)

Essentially creating two powerline networks but both connected to the router as one network.
 

All traffic is getting through the ports to the server correctly now.

Thanks for all the help