Home Network Community > DSL Modem Routers > IPv6 Firewall
< DSL Modem Routers

IPv6 Firewall

IPv6 Firewall

IPv6 Firewall
IPv6 Firewall
2024-09-23 07:19:53 - last edited 2024-09-24 01:12:33
Model: TD-W9970  
Hardware Version: V3
Firmware Version: 1.0.0 0.9.1 v009f.0 Build 190419 Rel.34272n

Folks, had this device a few years and am very happy with it.  I have not enabled firewall merely depending on its router functions of only allowing IN traffic related to an outgoing connection.

 

As my internet is now behind CGNAT my port redirection is non functional so I have enabled IPv6 - currently no IPv6 firewall enabled.  In this state I assume nothing is exposed to the internet.

 

If I enable IPv6 firewall and Allow the packets not specified by any filtering rules to passthrough this device does that mean any servers are open to the internet?

 

Geoff Lane

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:IPv6 Firewall
2024-09-24 11:11:00

  @Geffers 

 

Hi, thanks for posting question here.

Just as the words you mentioned, "the packets not specified by any filtering rules is to passthrough this device."

Note: The device will match the incoming packet with the enabled filtering rules one by one down the list and apply to the first matching rule. If the packet is not specified by any filtering rules within the list, then the Default Filtering Rule will take effect.

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#2
Options
Re:IPv6 Firewall
2024-09-26 08:54:05

  @Marvin_S 

 

What is it actually doing then if firewall not enabled?  Reason I ask is that if I enable to IPv6 firewall and have set DENY unless rule allows my laptop still is able to access any web pages I try and I make sure they are pages not accessed recently so would not be in a cache.  There is no rule allowing my laptop.

 

Geoff

 

  0  
  0  
#3
Options
Re:IPv6 Firewall
2024-09-27 06:17:23

  @Geffers 

 

IPv6 Firewall protects your IPv6 network by preventing access from the internet. However, when you are hosting a service, such as a file sharing server in your local network, you can choose to allow access to the server from the internet by adding entries on this page. This feature is available only when you’ve set up an IPv6 connection.

Did you set up the information from the screenshots below? Did you set up any detailed rules?

It is suggested to read P84-P88 in the User Guide to know more.

 

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#4
Options
Re:IPv6 Firewall
a week ago - last edited a week ago

  @Marvin_S   Thank you for reply and apologies for my delay in replying, I've got a new internet provider and temporarily had to use suppliers router.

 

To clarify, if I set default to 'deny all' then allow outward bound port 80 do I have to allow an inbound port 80 or are associated or established automatically allowed back in?

 

Geoff

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 262

Replies: 4

Related Articles
How can I configure IPV6 firewall
2556 1
IPV6 Firewall rules not work!!!
928 0
 IPV6 incoming Firewall Rules - where are they
414 0
 IPv6: How to disable IPv6 firewall?
839 0
AXE75 / AXE5400 IPv6 Firewall doesn't work
1290 0
 IPv6 Firewall Settings
959 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.