Official Release Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
This Article Applied to
Deco X50/X55_V1(V1.6) only
Note: Deco X50/X55_V1.2/V1.3 can't install this version. Nor did Deco X50-outdoor/Deco X50-POE
Modifications and Improvement
Note: Some features are not supported in Access Point mode.
1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.
Firmware Download Link
Deco X50_V1/1.6 |
1.6.1_build_20241010_Official Version |
Newly updated to Deco 1.12.0 Firmware Platform |
Deco X55_V1/1.6 |
1.6.1_build_20241010_Official Version |
Newly updated to Deco 1.12.0 Firmware Platform |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery-How to Downgrade Deco.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Arrows wrote
David-TP wrote
Hi, Thank you very much for the feedback.
The official 1.6.1 for Deco X50/X55 was just released. It is also suggested to install the 1.6.1 version to see whether it helped with the current issue.
I noticed you also submitted the Deco APP log. Thank you very much! The logs will be forwarded to the senior engineer for further analysis.
Thanks again and best regards.
Just installed the 1.6.1 and seems to be resolved. I will let you know if I run into the problem again. With 1.6.0 it started after a day.
It happened again after a day, a reboot of all Deco's seems to resolve this.
- Copy Link
- Report Inappropriate Content
@David-TP 1.6.1 isn't available for Deco X55 (US) V1.6 ? https://www.tp-link.com/us/support/download/deco-x55/v1.60/#Firmware 🔍
- Copy Link
- Report Inappropriate Content
Hi, It will be uploaded to the US site later. You can also wait for the 1.6.1 update notification through Deco APP if you don't want to manually update the firmware.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi @David-TP I received the update in the Deco app and installed it (couldn't find it on the US TP-Link site).
I have 7 X55 Decos installed in Access Point Mode: I have 6 X55 V1s and 1X55 V1.26. The main Deco is the V1.26 which is still in 1.2.0 Build 20231229 Rel. 43148 firmware. I have a few questions:
1. Is there a plan to release version 1.6.1 to the V1.26? What is the latest firmware for the V1.26?
2. Is it recommended to have the V1.26 as the main Deco or should I put one of the V1s that has the 1.6.1 firmware as the main Deco?
Thanks,
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
The new features are planned to be added to Deco X55_V1.20/1.26 as well.
The latest official firmware for Deco X55_V1.26 is 1.2.0. I think you could consider using Deco X55_V1.6 as the main Deco.
Best regards.
- Copy Link
- Report Inappropriate Content
Thanks @David-TP I just have V1 and V1.26. Should I keep the V1.26 as main Deco or should I switch to one of the V1 given they have a newest firmware?
David-TP wrote
Hi, Thanks for the feedback.
The new features are planned to be added to Deco X55_V1.20/1.26 as well.
The latest official firmware for Deco X55_V1.26 is 1.2.0. I think you could consider using Deco X55_V1.6 as the main Deco.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the quick reply.
Maybe I didn't explain it clearly.
V1.20 is V1.26(the same applies V1.0 and V1.6).
-x.6/x.8 is mainly used to mark the place of production.
Deco X55_V1.6 would be better as the main Deco.
1.6.1_build_20241010 is the latest firmware for Deco X55_V1.6.
1.2.0_Build_20231229 is the latest firmware for Deco X55_V1.26
Best regards
- Copy Link
- Report Inappropriate Content
@David-TP does this firmware fixes the issue with Satellite Deco Units Work Well but Display Offline on the Deco APP https://community.tp-link.com/en/home/forum/topic/697580?sortDir=ASC&page=1 ?
- Copy Link
- Report Inappropriate Content
@David-TP , Installed 1.6.1 build 20241010 Rel. 65389 on all 3 Decos. Two satellite units seem to be showing correctly. The main unit though shows the devices connected, but does not show signal strength and/or wireless/wired status for each device connected. Deco app is 3.8.114. Have restarted everything and the main unit will show correctly for about a day, then it dissappears.
- Copy Link
- Report Inappropriate Content
@BatTech I have exactly the same issue.
The longer I have Deco, the more I believe that the whole ecosystem is a bad joke - one bug follows another. Geez, do you guys have any QC up there?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 9972
Replies: 50
Voters 1
