Home Network Community > Wi-Fi Routers > How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
< Wi-Fi Routers

How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?

How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?

How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-18 19:56:48 - last edited 2024-09-18 20:03:13

-Lan cables are working properly.
-Ip camera got 12V power.
-Both routers are working.
-ADSL wi-fi router is in 'bridge mode' and DHCP is off.

  0      
 
  0      
 
#1
Options
7 Reply
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-18 22:22:22

  @Jaffaro 

 

Hi,

 

Could you perhaps post a screenshot of the settings menu where you configure "bridge mode" on the ADSL Wi-Fi router?

 

I know some router manufacturers use the term "Bridge mode" to refer to what TP-Link calls "Access Point" mode.

 

However, on routers that come with a built-in modem (in your case an ADSL modem) the term "bridge mode" more commonly refers to disabling the "router" features of the device and having it work as a pure modem. If that was the case for your ADSL Wi-Fi router, then the network setup shown in your drawing would likely not work.

 

  0  
  0  
#2
Options
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-19 22:17:05

  @woozle 

  0  
  0  
#3
Options
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-19 22:17:50

  @Jaffaro 

  0  
  0  
#4
Options
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-19 22:19:16

  @woozle 

  0  
  0  
#5
Options
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-19 22:21:23

  @woozle ip address of ip camera: 192.168.1.64 (factory settings)

  0  
  0  
#6
Options
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-19 22:27:27

  @woozle 

  0  
  0  
#7
Options
Re:How do I connect to an IP camera via an ADSL router with 'bridge mode' with LAN connection?
2024-09-20 04:27:15

  @Jaffaro 

 

Using this guide you should be able to use your ADSL router as access point and get this topology working.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 298

Replies: 7

Related Articles
 Connect to router via default ip
837 0
 TL-WR1043ND not connect to ip camera
606 0
Adding Ethernet ports via Switch or a different route?
1975 0
AX55 access to WAN modem via static route
545 0
 Can't connect to WA854RE via the IP adres
810 0
route
323 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.