Home

Forums

Stories

Knowledge Base

Home Network Community > Range Extenders > RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

< Range Extenders

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

2024-09-08 14:22:23 - last edited 2024-09-10 17:57:08

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-08

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

2024-09-08 14:22:23 - last edited 2024-09-10 17:57:08

Tags: #OneMesh #EasyMesh

Model: RE200 Archer VX1800v

Hardware Version: V5

Firmware Version: 1.0.23

So my problem starts with web page.

https://www.tp-link.com/en/home-networking/range-extender/re200/v5/#specifications
This link clearly shows my just-bought RE200 V5 supports EasyMesh which is compatible with my VX1800v device.

However I just found out that the device is not compatible with EasyMesh, it is for OneMesh. Now I am getting an error that I cannot use two devices together as a mesh system.

Any possible solution? Any firmware update planned to any device? Any work around?

Thanks.

0

0

#1

1 Accepted Solution

LV5

2024-09-10 16:58:56 - last edited 2024-09-10 17:57:08

Posts: 2773

Helpful: 1856

Solutions: 472

Stories: 0

Registered: 2020-05-01

Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?-Solution

2024-09-10 16:58:56 - last edited 2024-09-10 17:57:08

Please use the RE200's internal web management interface to setup the EasyMesh connection. The Tether app may not have been updated yet to reflect the features of firmware 1.0.23.

There are different ways to get into the web interface via a web browser.

You can try if http://tplinkrepeater.net/ works for you. If it doesn't, then you need to access it via its current IP address, like http://192.168.x.x, but you have to replace the x with the correct numbers.

Recommended Solution

0

0

#5

5 Reply

LV5

2024-09-08 22:32:46

Posts: 2773

Helpful: 1856

Solutions: 472

Stories: 0

Registered: 2020-05-01

Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

2024-09-08 22:32:46

Hi,

According to the firmware update notes EasyMesh was added to the RE200 V5 in firmware version 1.0.23.

https://www.tp-link.com/en/support/download/re200/v5/#Firmware

Can you please post a screenshot that shows the error you are getting?

0

0

#2

LV1

2024-09-10 15:55:18

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-08

Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

2024-09-10 15:55:18

Extender settings screen

Extender sertings screen

Extender RE200 V5

Extender Model

Main Router settings screen

Error says main router does not support OneMesh.

The thing is extender should support the EasyMesh but it is not visible on the settings screen.

0

0

#3

LV1

2024-09-10 15:55:44

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-08

Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

2024-09-10 15:55:44

Error message @trioxify

0

0

#4

LV5

2024-09-10 16:58:56 - last edited 2024-09-10 17:57:08

Posts: 2773

Helpful: 1856

Solutions: 472

Stories: 0

Registered: 2020-05-01

Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?-Solution

2024-09-10 16:58:56 - last edited 2024-09-10 17:57:08

Please use the RE200's internal web management interface to setup the EasyMesh connection. The Tether app may not have been updated yet to reflect the features of firmware 1.0.23.

There are different ways to get into the web interface via a web browser.

You can try if http://tplinkrepeater.net/ works for you. If it doesn't, then you need to access it via its current IP address, like http://192.168.x.x, but you have to replace the x with the correct numbers.

Recommended Solution

0

0

#5

LV1

2024-09-10 18:11:05

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-08

Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

2024-09-10 18:11:05

So as you mentioned I have successfully enabled easymesh on both devices. Now I have a network topology like shown above.

0

0

#6