Can't access devices connected to range extender from router wifi
I have Archer VR600 v3, Firmware Version:1.6.0 0.9.1 v009e.0 Build 230809 Rel.6944n with a RE605X repeater connected to it with OneMesh, devices connected to the router wifi, cannot connect to devices connected to the repeater. I have DHCP disabled on the repeater and enabled on the router.
The repeater has static IP and I can't connect to the web interface when I am not in the same room.
For example, I have a Raspberry Pi with static IP on 192.168.1.120 with a webserver running, when it connects it can only be accessed on my phone only if I am in the same room, when I move to a different room, connection to that IP address fails.
Another issue I had is I was unable to connect to WhatsApp calls on my phone when connected to the repeater wifi.
There's another repeater TP-Link RE305 4.0 connected to the same mesh network and does not have these issues.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Please try to ping the Raspberry Pi IP and also the router's LAN IP when you connect to the RE605X and provide the ping results.
- Copy Link
- Report Inappropriate Content
Here you go, I added tracert just in case
PS C:\Users\Hus> ping 192.168.1.120 Pinging 192.168.1.120 with 32 bytes of data: Reply from 192.168.1.120: bytes=32 time=2ms TTL=64 Reply from 192.168.1.120: bytes=32 time=4ms TTL=64 Reply from 192.168.1.120: bytes=32 time=1ms TTL=64 Reply from 192.168.1.120: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.1.120: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 4ms, Average = 2ms PS C:\Users\Hus> tracert 192.168.1.120 Tracing route to 192.168.1.120 over a maximum of 30 hops 1 1 ms 2 ms 1 ms 192.168.1.120 Trace complete. PS C:\Users\Hus> ping 192.168.1.1 Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time=2ms TTL=64 Reply from 192.168.1.1: bytes=32 time=6ms TTL=64 Reply from 192.168.1.1: bytes=32 time=5ms TTL=64 Reply from 192.168.1.1: bytes=32 time=2ms TTL=64 Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 6ms, Average = 3ms
Pinging the router from inside the Pi:
klipper@mainsailos:~ $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=3.52 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=3.20 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=3.08 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=2.49 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.86 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.89 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=1.83 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.23 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=3.31 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=2.75 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=2.82 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=2.51 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=3.28 ms ^C --- 192.168.1.1 ping statistics --- 13 packets transmitted, 13 received, 0% packet loss, time 12016ms rtt min/avg/max/mdev = 1.833/2.675/3.524/0.569 ms
klipper@mainsailos:~ $ traceroute 192.168.1.1 traceroute to 192.168.1.1 (192.168.1.1), 30 hops max, 60 byte packets 1 192.168.1.1 (192.168.1.1) 5.984 ms 6.122 ms 6.391 ms
Pinging when my computer is not connected to the repeater, I also pinged it on the mDNS address just to check if it's reachable, but it wasn't:
PS C:\Users\Hus> ping 192.168.1.120 Pinging 192.168.1.120 with 32 bytes of data: Reply from 192.168.1.101: Destination host unreachable. Request timed out. Reply from 192.168.1.101: Destination host unreachable. Reply from 192.168.1.101: Destination host unreachable. Ping statistics for 192.168.1.120: Packets: Sent = 4, Received = 3, Lost = 1 (25% loss), PS C:\Users\Hus> tracert 192.168.1.120 Tracing route to 192.168.1.120 over a maximum of 30 hops 1 * Hus-Asus [192.168.1.101] reports: Destination host unreachable. Trace complete. PS C:\Users\Hus> ping mainsailos.local Pinging mainsailos.local [fe80::32da:a4b6:a60c:aac3%18] with 32 bytes of data: Destination host unreachable. Destination host unreachable. Destination host unreachable. Destination host unreachable. Ping statistics for fe80::32da:a4b6:a60c:aac3%18: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), PS C:\Users\Hus> tracert mainsailos.local Tracing route to mainsailos.local [fe80::32da:a4b6:a60c:aac3%18] over a maximum of 30 hops: 1 * * Destination host unreachable. Trace complete.
- Copy Link
- Report Inappropriate Content
@Sunshine Any updates on this?
- Copy Link
- Report Inappropriate Content
Still having these issues
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 382
Replies: 5
Voters 0
No one has voted for it yet.