Home Network Community > Range Extenders > RE500X and Wifi6 for 2.4Ghz network
< Range Extenders

RE500X and Wifi6 for 2.4Ghz network

RE500X and Wifi6 for 2.4Ghz network

RE500X and Wifi6 for 2.4Ghz network
RE500X and Wifi6 for 2.4Ghz network
2024-07-31 21:46:31 - last edited 2024-08-05 12:40:46
Model: RE500X  
Hardware Version:
Firmware Version:

Installed today my RE500X to extend my 2.4Ghz Wifi6 network. Unfortunately the repeater creates a Wifi6 network ONLY for the 5Ghz band! It's written nowhere it's ax/WiFi 6 only on 5Ghz band. It must be WiFi 6 for both bands. Or it's mine not working? 

I can't use 5ghz due to some interferences in my environment. 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:RE500X and Wifi6 for 2.4Ghz network-Solution
2024-08-01 06:44:01 - last edited 2024-08-05 12:40:46

  @Gian69 

Hi,

 

2.4G does not support WIFI6.

You can check its wireless standard.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:RE500X and Wifi6 for 2.4Ghz network-Solution
2024-08-05 11:12:05 - last edited 2024-08-05 12:40:55

  @Gian69 

 

Hi,

 

As a general rule for your future purchases, Wi-Fi products marketed as "AX1500" only support Wi-Fi 6 (802.11ax) on the 5 GHz band. This also applies to products of other manufacturers who've decided to offer such a hardware configuration.


The next class above AX1500 that supports Wi-Fi 6 (802.11ax) on both bands is usually marked as "AX1800".


But in any case, it's always a good idea to check the manufacturer's product specification in detail before purchase, because there are some odd configurations available on the market.

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:RE500X and Wifi6 for 2.4Ghz network-Solution
2024-08-01 06:44:01 - last edited 2024-08-05 12:40:46

  @Gian69 

Hi,

 

2.4G does not support WIFI6.

You can check its wireless standard.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:RE500X and Wifi6 for 2.4Ghz network
2024-08-04 21:54:01

  @Sunshine  thank you 

Anyhow it's this device limitation (that I couldn't see on amazon when purchased it). It says its a Wifi6 repeater mentioning 2.4 and 5ghz networks. 

In fact the 802.11ax standard works with both frequencies. 

I'm on my main router now (a zte) at 2.4Ghz Wifi6. 

I will return it. 

  0  
  0  
#3
Options
Re:RE500X and Wifi6 for 2.4Ghz network-Solution
2024-08-05 11:12:05 - last edited 2024-08-05 12:40:55

  @Gian69 

 

Hi,

 

As a general rule for your future purchases, Wi-Fi products marketed as "AX1500" only support Wi-Fi 6 (802.11ax) on the 5 GHz band. This also applies to products of other manufacturers who've decided to offer such a hardware configuration.


The next class above AX1500 that supports Wi-Fi 6 (802.11ax) on both bands is usually marked as "AX1800".


But in any case, it's always a good idea to check the manufacturer's product specification in detail before purchase, because there are some odd configurations available on the market.

Recommended Solution
  0  
  0  
#4
Options
Re:RE500X and Wifi6 for 2.4Ghz network
2024-08-05 12:40:21

  @woozle Ok and thanks.

 

Apparently I fell into the Marketing trap ! :-) On Amazon it is not clear enough and despite normally look at the specs this time I was too light in clicking "purchase".

WiFi6 is everywhere in the box and information, 2.4Ghz should be "asterisked"* since the AX1500 is not a standard, WiFi6/802.11ax is, so people can't assume.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 362

Replies: 4

Related Articles
Can I use an AP (RE500X) as a source of OneMesh
518 0
 OneMesh Wifi6 AX10 + RE500X
346 0
 RE500X WPA3 support
417 0
 Can't create mesh network with Fastweb Nexxt and RE500X
308 0
 RE500X stop working after a while
577 0
 To set up a RE500X extender in Access Point mode by ethernet to TL-WPA4220 on wifi circuit.
751 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.