Beta Software Improve the Overall System Stability of Archer BE550/BE800
This Article Applies to:
Archer BE550 V1
Archer BE9300 V1
Archer BE800 V1
Archer GE800 V1
Overview
We hope to offer you a chance to experience the pre-released version of firmware for our Wi-Fi 7 routers, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Modifications
Improved the overall system stability.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(4) If you still receive a new firmware update notification on the router's web interface or the Tether App after installing the beta software, it's recommended that you do not upgrade to the new firmware at this time. Instead, please stay on the provided beta version until you are ready to leave this beta software testing.
Direct Firmware Download Link
Archer BE550_V1_1.0.11 Build 240801 (Beta Version)
Archer BE9300_V1_1.0.8 Build 240417 (Beta Version)
Archer BE800_V1_1.1.6 Build 240711 (Beta Version)
Archer GE800_V1_1.1.3 Build 240527 (Beta Version)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Model, hardware version, and firmware version of your router.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Update Log
Sep 24th, 2024:
Added two related articles of the latest official firmware release for the mentioned models.
Aug 2nd, 2024:
Update and provide a new 1.0.11 beta version.
Jul 31th, 2024:
Removed the beta firmware for Archer BE550 V1. We will update and provide a new beta version very soon. Please wait.
Jul 25th, 2024:
Provided an updated beta firmware for Archer BE800 V1.
Jul 24th, 2024:
Release of the post
Recommended Threads
Archer BE800/BE9300 New Software Enhances System Stability and Optimizes MLO Network Stability
Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z Thank you Kevin
- Copy Link
- Report Inappropriate Content
@Kevin_Z : I have the problem that sometimes the entire 5G network fails on the BE800, and only works again after a restart of the router. Will this beta firmware solve that problem?
- Copy Link
- Report Inappropriate Content
Welcome in our free beta test familly :D i think you need install to check IT first and run own testing, like we all do HERE ^^
- Copy Link
- Report Inappropriate Content
Was on the PS5 last night doing some rare late online gaming when I was suddenly kicked out. Checking I had zero connection to anything, BE550 had lost internet connection and all Wi-Fi and LAN devices disconnected. Trying to use my mobile Tether app on the iPhone could not find the router. On checking the router lights all looked good and my ONT box looked OK too.
This happened as it struck midnight, I had no schedules set and was the first time I'd experienced this. Had to do a power off at the router then let it restart. Back to normal after that. Strange considering its the first time that happened and at a specific time.
Will the logs go back 9 hours? or will they be wiped after I restarted the router as I'm curious about checking something else that may have been the cause.
- Copy Link
- Report Inappropriate Content
@David6479 that's how the fun begins. It'll then start kicking you out all the time. If you check your logs, it'll look similar to what I'm getting. Padi error.
- Copy Link
- Report Inappropriate Content
@Football_Dave Do the logs go back 9hrs? I checked this morning out of interest but could only see an hours worth.
- Copy Link
- Report Inappropriate Content
@David6479 exactly like mine. It clears them. I connected my old router and put this as a satellite. It's so frustrating.
- Copy Link
- Report Inappropriate Content
For me the most annoying its when main router switch alone channels etc. in random time. can be few minutes also can be few days. But only if its connected other BE550 as satellite router. With AX55 as satellite works stable or i have luck LOL
Also is annoying the 6GHz on Be protocol don't work with full speed on my WiFi Intel BE200 300Mhz card. Cut speed on 160/80mhz width from 1meter from main router LOL
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@SmartTP To be honest I can't remember but I did ask in the beginning for release notes to be accompanied because it would be worthwhile knowing what has actually been looked at.
A "system stability" quote really isn't worth the paper it's printed on because it never is. A list of work is required to make our time worth it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 11317
Replies: 103