Official Release Deco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability
This Article applied to:
Deco X50/X55_V1/1.6_1.5.1/1.5.0
Firmware Download Link:
| Deco X50_V1/1.6 | 1.5.5_build_20240718 (Official Version) |
| Deco X55_V1/1.6 |
1.5.5_build_20240718 (Official Version) |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
Modifications and Improvement
1. Supported configuring IPv6 during setup.
2. Added the low-power feature.
3. Enhanced the VPN performance.
4. LED schedule feature supported control of individual device LEDs.
5. Improved the overall Deco App experience, especially with the online client list status.
6. Increased networking number.
7. Enhanced the system security.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, the 1.5.x official link for Deco X50/Deco X55:
| Deco X55_V1 | 1.5.3_build_20240531 |
| Deco X50_V1 | 1.5.1_build_20240605 |
The process of reverting from 1.5.5 to 1.5.1/1.5.3 is the same as firmware upgrade process. The users just need to upload the above 1.5.x bin file via "Local Upgrade".
How to Update the Firmware of Deco
Best regards.
- Copy Link
- Report Inappropriate Content
at the start og this thread with have newest firmware :
Firmware Download Link:
| Deco X50_V1/1.6 | 1.5.5_build_20240718 (Official Version) |
| Deco X55_V1/1.6 |
1.5.5_build_20240718 (Official Version) |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
- Copy Link
- Report Inappropriate Content
@Pascal_DECO_94, Did you even bother to read my original question??, the whole point of this was because the latest firmware is so unstable
Pascal_DECO_94 wrote
at the start og this thread with have newest firmware :
Firmware Download Link:
Deco X50_V1/1.6 1.5.5_build_20240718 (Official Version) Deco X55_V1/1.6
1.5.5_build_20240718 (Official Version) Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
- Copy Link
- Report Inappropriate Content
Why is this only for V1?
I have V1.20 and would also like to see some (major) improvements.
I have some issues with roaming on multiple devices and as far as features go I would like to have some more control like transmitting power to optimize the network.
It all is very very basic now. A button "show advanced settings" and a warning "continue at your own risk" would be an option.
- Copy Link
- Report Inappropriate Content
Hi, I believe it was due to the pool layout of the community UI, and sometimes I would also confuse the reply. It will be better when a new UI of the community is released, such as:
I'm sure Pascal intended to offer his advice and 1.5.5 is indeed more stable than the previous 1.5.1/1.5.3 version based on the user feedback I have received.
Have you downgraded to 1.5.1/1.5.3 already? If not, it would be highly appreciated if you could add more details about the network instability and our engineers would love to provide further assistance.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP as per info for you:
- installed 1.5.5 on my Deco X50 v1.0 (EU).
- no issues for 24 hours.
- network map is : modem -> Main Deco -> switch -> Deco 2 and Deco 3
- Deco is in router mode
- Copy Link
- Report Inappropriate Content
David, I too have devices known online and working without any performance issue, yet the app shows them offline. Almost all are in the IoT network, and some flap back and forth between online and offline. This has started since the 1.5.5 FW update.
I believe this is also related to my other issue of device alerts not working. Several of these IoT devices are on the alert list, none have reported any alerts.
- Copy Link
- Report Inappropriate Content
@David-TP for X50-Outodoor when to expect a firmware upgrade from 1.2.5?
- Copy Link
- Report Inappropriate Content
Deco X50/X55 V1 Firmware Update - Version 1.5.5
Date: 2024-07-04
Firmware Versions:
- Deco X50_V1/1.6_1.5.5_build_20240718
- Deco X55_V1/1.6_1.5.5_build_20240718
What’s New:
- IPv6 setup support
- New low-power feature
- Improved VPN performance
- Individual LED control
- Better Deco App experience and online client list
- Increased network capacity
- Enhanced system security
Update Tips:
- Make sure your Deco App is updated.
- Check out the guide on how to manually update via the web UI.
Update now to enjoy a smoother network experience. And if you need a break, you might want to check out the latest on
Deco X50/X55 V1 Firmware Update - Version 1.5.5
Date: 2024-07-04
Firmware Versions:
- Deco X50_V1/1.6_1.5.5_build_20240718
- Deco X55_V1/1.6_1.5.5_build_20240718
What’s New:
- IPv6 setup support
- New low-power feature
- Improved VPN performance
- Individual LED control
- Better Deco App experience and online client list
- Increased network capacity
- Enhanced system security
Update Tips:
- Make sure your Deco App is updated.
- Check out the guide on how to manually update via the web UI.
Update now to enjoy a smoother network experience. And if you need a break, you might want to check out the latest on hairfoodoilcom
!
- Copy Link
- Report Inappropriate Content
hi, I have three deco x50 with version 1.5.1 including the main one and 2 others with 1.4.1 installed later. Would it be possible to bring the three back to version 1.4.1 while waiting for 1.5.5 in the official channels? I don't know if it has anything to do with it but in addition to the problems reported for 1.5.1, I no longer receive push notifications for new connected devices. thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 18835
Replies: 146
Voters 1
