Official Release Deco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability
This Article applied to:
Deco X50/X55_V1/1.6_1.5.1/1.5.0
Firmware Download Link:
| Deco X50_V1/1.6 | 1.5.5_build_20240718 (Official Version) |
| Deco X55_V1/1.6 |
1.5.5_build_20240718 (Official Version) |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
Modifications and Improvement
1. Supported configuring IPv6 during setup.
2. Added the low-power feature.
3. Enhanced the VPN performance.
4. LED schedule feature supported control of individual device LEDs.
5. Improved the overall Deco App experience, especially with the online client list status.
6. Increased networking number.
7. Enhanced the system security.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@DenniSundaY dank voor terugmelden ☺️ inderdaad erg jammer.
- Copy Link
- Report Inappropriate Content
JanRekenaar wrote
@Moral3s cool. It is not available in Deco app yet here. I have 3 decos. If I install 1.5.5 on the Main Deco, does it install automatically on all Deco Nodes? Or do I have to install the firmware om every device seperately. ?
You log in to your router's IP, go to the update tab(system->advanced->firmware update), select the update file, and the firmware will install on all the devices in the mesh network. It takes about 3-4 minutes, including a restart after the update.
- Copy Link
- Report Inappropriate Content
@Pascal_DECO_94 Now... let's see how long until the firmware update is available through the app :D. I'm still on 1.4.1...
- Copy Link
- Report Inappropriate Content
@unr3voked same here! I skipped 1.5.1. No 1.5.5 in the app yet.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Could you please refer to this link to help me submit the Deco APP log:
Can you also attach a screenshot that the ISP modem router(DHCP server) was recognized as the online client?
By the way, may I know the model number of the ISP modem router?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
Hi David, I've just sent the feedback and included 2 screenshots with one showing the modem in the client list and also shows the opposite up/down network stream compared to my MacBook while performing a Speedtest.
I have a AVM FritzBox!Box 7590.
Kind regards
- Copy Link
- Report Inappropriate Content
@David-TP since this so called update all my clients are identified as DeviceXX whereas they used to be identified as SkyQ and Martin's Pixel 8 etc, also, the system is so unstable, how do I roll back to the previous firmware??
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
May I know your previous firmware version?
If it is 1.5.1/1.5.3, it could revert to this version directly via the web interface.
However, I hope you can share more details(which description-Fix unstable connection when connected to the Deco network here is quite like yours, maybe the third one?) about the "unstable issue" so that I can further check with the engineer. Based on the current feedback, 1.5.5 is quite a stable and well-performed version.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP hi David, how does reverting firmware work throughout webinterface?
- Copy Link
- Report Inappropriate Content
@David-TP My 3 Deco x50 (main deco in router mode) are all running on 1.5.5 for some days now without any issues.
only two things i noticed:
1. mainly one of my 2 cameras (ethernet) is shown offline allthough it is online.
2. sometimes my iPad 7 logs in with another name an ip address.
both are just minor issues, overall performance is excellent.
Best
Seef
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 17174
Replies: 146
Voters 0
No one has voted for it yet.