TG-3468 doesn't go full-speed
I have a very poor quality PC atm, it's an old iMedia s1300 from Packardbell with am3 processor and da061l-3d motherboard. Onboard nvidia lan can only run 10/100, so i decided to get an affordable option gigabit card to at least have usable internet connection. My ISP provides me with 900 mbps pppoe connection, it works fine wirelessly (700 mbps hardware limit on galaxy s20 fe) AND it worked fine (slightly more than promised by ISP even) on wired before, when i still had a decent desktop. Problem is i'm being limited to 250 mbps on this new system, no matter what i'm trying out. It also shows 1000/1000 link speed in windows network settings and powershell so i'm really not sure what the problem could be. Nothing else in network setup was changed i.e router same, cable same (cat. 7). Thanks in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Ok, thanks. You don't mention it, but I assume you are doing the speedtest via a website inside a web browser.
I have noticed previously that especially Ookla Speedtest (speedtest.net) is quite CPU heavy when run in a web browser, which means that on old and slow computers it might be capped by the CPU's performance.
To rule out that this is an issue I recommend you install Ookla's "Speedtest For Windows" software on your computer and use it for speed testing.
www.speedtest.net/apps/windows , either 64-bit or 32-bit, depending on your version of Windows.
In case you are running Linux, there is a command line version of the software available.
- Copy Link
- Report Inappropriate Content
Hi
You could perform hardware testing by swapping out the PCIe slot, the modem/router's Gigabit LAN interface, the PC, or the network cable (CAT5e/6).
To obtain a more accurate speed reading, always select the nearest server node while measuring.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@woozle Performed via speedtest on several different servers. Also attempted through similar service for the same result.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Router is modern enough, ASUS RT-AX55. Speed readings were fine when used before on z370 motherboard with integrated gigabit port. Cable also stayed the same and was not damaged in the mean time. Sadly can't test another PC for the lack of it. Motherboard is primitive, and would not allow me to swap pci slot, i'll attach a picture of identical board from the internet
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Ok, thanks. You don't mention it, but I assume you are doing the speedtest via a website inside a web browser.
I have noticed previously that especially Ookla Speedtest (speedtest.net) is quite CPU heavy when run in a web browser, which means that on old and slow computers it might be capped by the CPU's performance.
To rule out that this is an issue I recommend you install Ookla's "Speedtest For Windows" software on your computer and use it for speed testing.
www.speedtest.net/apps/windows , either 64-bit or 32-bit, depending on your version of Windows.
In case you are running Linux, there is a command line version of the software available.
- Copy Link
- Report Inappropriate Content
@woozle Precisely correct and i did as you suggested, it really was as shrimple as that. Standalone app does show correct speeds +-. Thank you so much. Thread can be closed now.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 509
Replies: 7
Voters 0
No one has voted for it yet.