@Lespadon 

 

Hi,

 

It should switch to Ethernet backhaul automatically after an Ethernet cable has been connected between the two routers.

 

Is the connection made via a straight cable or is the connection made through a network switch of some sort?
 

Hi, Yes it's a straigh wired cable not throw a Switch, connexion stay AT wireless, i tried to add it as a satellite first, KO then i reset and Linked from l'an port on ax55 to lan port on c80, same end Both are UP to date with latest firmware available Regards

Thé ax55 became instable when connected with ethernet lan to lan, stable when unplugged

Thé ax55 became instable when connected with ethernet lan to lan, stable when unplugged

  @Lespadon 

 

That sounds like the problems people have had with EasyMesh routers that didn't support EasyMesh Ethernet backhaul.

 

So the AX55 V1 is running firmware verison 1.3.2 and the C80 has firmware version 1.13.2 (ow newer), right?
 

Have you tested whether it works any better if you plug the Ethernet cable in the WAN port of the C80?

  @woozle 

No the last firmware available in frznce is https://www.tp-link.com/fr/support/download/archer-ax55/v1/#Firmware is 1.26

 

i just tried the beta firmawre from https://community.tp-link.com/en/home/forum/topic/636954 and it works !!!

 

so the current frech firmware is out of date 

 

can i install us firmware on my ax55 v1 without issue? 

 

Regards

  @Lespadon 

IF you have AX55v1 you can install US firmware without problem: https://www.tp-link.com/us/support/download/archer-ax55/v1/#Firmware

 

BTW. When you update to newst firmware please check if USB stroge works good for you? If you able to send files and make new folders in stroage when you unselect one of subfolders :)