@David-TP 

Many thanks David, 

let's hope this will make X50-5g much more stable. 

Thank you.

  @David-TP 

Hi David, 

Quick update, after I manually selected 4g and 5g band main unit freeze and restarded but so far in last 24 hours no red light and download gone up from 150mb to 250mb average and upload gone from 22mb to 36mb average.

Thank you for this beta version, looks like it is right direction for Deco.

  @David-TP when will X50-4G receive Bridge mode? Will it be unfair rollout again?

  @David-TP 

Hello,

Since the last update my internet speed is slower!

I went from 250mb to arround 150. My ISP has the following bands: B1, B3, B8, N28, N78.  Its a NSA 5G network,before this last update i always had one 4g band and one 5g band agregated, after the update, it only gives me separate B1 or B3 or both at same time in auto, i tried to manually select the following: B1 , N28, N78 it only connects to B1.

It doesnt connect to N28 or N78 anymore.

I tried to install previous firmware and i couldnt. What  should i do?!

  @David-TP 

Hi,

im no internet or network expert, all i can tell you is that before the last firmware update, i always had one 4g band  + one 5g band.

Usually in Auto Band i always had B1 + N78 sometimes B1+ N28, this is the fastest speeds in my case (200-300 Mbps).

After the last firmware update, in Auto Band, all i see is only B1 or only B3 or both B1+B3. I mannually selected B1 and N78, but only displays B1, and the speeds go from 40Mbps to 150.

In Auto Band, the same, i cant reach 200, before i had between 200-300.

Available ISP bands: B1,B3,B8,B20, N28,N78. I didnt trie to lock cells, because i have to put values between ex: 0-1000, i have no clue what to put to the specific cells.

I dont know if the terms im using, are correct as well.

Speedtest