Xbox S MTU 1440
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
لم أتمكن من الحصول على إجابة مباشرة من دعم Xbox على هذا...
ضمن إعدادات الشبكة، تظهر MTU كـ 1440. وفي إعدادات جهاز التوجيه الخاص بي، تظهر كـ 1500. هل يجب أن تكون هي نفسها أم لا بأس طالما أن جهاز التوجيه الخاص بي أعلى مما يظهره جهاز xbox (1440)؟؟؟
سوني / نينتندو تمتلكها. مايكروسوفت لا تفعل ذلك. لماذا؟
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question here.
Do you need to take port forwarding for your XXbox?
Port forwarding on a router is a technique that is used to allow external devices access to services on private networks. This is typically used for gaming, running a web server, or for some peer-to-peer file sharing systems. The port forwarding feature is only available when the router is working in Router Mode.
You may log in to router's Web management page and go to Advanced > NAT Forwarding > Port Forwarding/Virtual Server/DMZ to configure it.
If you are using port forwarding and DMZ host at the same time, please note that port forwarding rules have greater priority than DMZ.
This FAQ provides the detailed instructions on configuring port forwarding based on different router models.
Additionally, here are some tips for you if port forwarding doesn't work:
1. Make sure the server is accessible from the internal network.
2. Make sure your router obtains the public WAN IP address, if your WAN IP is not a public one, port forwarding will not work. (CGNAT address is also private IP address that ranges from 100.64.0.0 to 100.127.255.255.)
3. Check the firewall settings of your server, make sure it allows traffic from the outside Internet.
- Copy Link
- Report Inappropriate Content
@Marvin_S The problem has been solved with DMZ from the main router
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
Do you need to take port forwarding for your XXbox?
Port forwarding on a router is a technique that is used to allow external devices access to services on private networks. This is typically used for gaming, running a web server, or for some peer-to-peer file sharing systems. The port forwarding feature is only available when the router is working in Router Mode.
You may log in to router's Web management page and go to Advanced > NAT Forwarding > Port Forwarding/Virtual Server/DMZ to configure it.
If you are using port forwarding and DMZ host at the same time, please note that port forwarding rules have greater priority than DMZ.
This FAQ provides the detailed instructions on configuring port forwarding based on different router models.
Additionally, here are some tips for you if port forwarding doesn't work:
1. Make sure the server is accessible from the internal network.
2. Make sure your router obtains the public WAN IP address, if your WAN IP is not a public one, port forwarding will not work. (CGNAT address is also private IP address that ranges from 100.64.0.0 to 100.127.255.255.)
3. Check the firewall settings of your server, make sure it allows traffic from the outside Internet.
- Copy Link
- Report Inappropriate Content
@Marvin_S Hello, my problem is with the random upnp router, even after the necessary ports were opened manually, I am facing the problem of random ports, I have tried several attempts to no avail, and my friend's router was borrowed to do a test for two days, and I did not face any problems other than my router, it seems to me that the problem is as I expected, the problem is in the new update
- Copy Link
- Report Inappropriate Content
@Marvin_S The problem has been solved with DMZ from the main router
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 379
Replies: 3
Voters 1