No Internet Connection
I was trying to set up a new Archer AX80 to replace my old Linksys WRT 32X and I can't get the internet to connect no matter what I do. I've followed the support video on what to do if I can't connect, and it all results in the red LED being on and the dashboard saying there's no internet connection. I still have my old router connected, and I've tried connecting to multiple ports on the modem as well as the 2.5 and 1.0 ports on the Archer with no success. When I pull up the dashboard and check the online status, this is what I'm getting;
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question on our community.
If no network access with your router, you may try the following troubleshooting
Orange/Red Internet light on the router:
1. Unplug your router from the modem, connect your PC directly into the modem to verify the Internet status of your ISP.
2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.
3. Login to the web UI via http://tplinkwifi.net and set it up following the Quick Setup.
4. If your PC has Internet when connected to the modem, but the Router still doesn't, please go to Advanced > Network > Internet > Mac Clone to clone the mac address of your PC. This FAQ contains detailed instructions of Mac Clone: FAQ2264
Or you may refer to the FAQ directly.
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question on our community.
If no network access with your router, you may try the following troubleshooting
Orange/Red Internet light on the router:
1. Unplug your router from the modem, connect your PC directly into the modem to verify the Internet status of your ISP.
2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.
3. Login to the web UI via http://tplinkwifi.net and set it up following the Quick Setup.
4. If your PC has Internet when connected to the modem, but the Router still doesn't, please go to Advanced > Network > Internet > Mac Clone to clone the mac address of your PC. This FAQ contains detailed instructions of Mac Clone: FAQ2264
Or you may refer to the FAQ directly.
- Copy Link
- Report Inappropriate Content
@Bbjornsson is the archer Ax80 stand-alone and if so why won't it give me a internet conne
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 224
Replies: 2
Voters 0
No one has voted for it yet.