mesh slow

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

mesh slow

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
mesh slow
mesh slow
2024-04-29 01:15:10
Model: Deco X60  
Hardware Version:
Firmware Version: 1.0.7

All set up the app says it's all good, but the speeds are incredibly slow The main device shows between 0 and 28kbps down and 0 upload.  The other one shows   better sometimes but usually about the same.

I'm on a Bell fibre network with dl speeds of around 1500mbps so I would think I'd get better results.

 

  0      
  0      
#1
Options
1 Reply
Re:mesh slow
2024-04-30 06:55:12

  @acemccool 

Hi, welcome to the community.

It is suggested to update the firmware from 1.0.7 to the latest 1.2.5 version first:

Deco X60(US)_V3_1.2.5 Build 20240106

 

Since the Ethernet ports on Deco X60 are gigabit ports, the maximum internet bandwidth is up to 1000m/s.

Have you tested the Ethernet speed on a wired laptop from the main Deco X60?

 

The data rate on the Deco APP is not testing the internet bandwidth from the main Deco to the Bell fiber modem.

It should display the real-time speed rate in the local network through the main Deco. The speed rates here on the Deco APP are mostly for reference.

Thank you very much and best regards.

  0  
  0  
#2
Options